Members Bert03241 Posted January 4, 2022 Members Report Posted January 4, 2022 I got a couple sq's of this faux Rattle Snake Skin. Wanted to see what it looked like and how it would form for molded knife sheaths.Glued and stitched to 5 to 6 oz Veg tan. The sq's were cheap so I didn't expect much. But it didn't turn out to bad. I'll probably get some flak on my choice of thread but thats OK . Quote
Members PastorBob Posted January 4, 2022 Members Report Posted January 4, 2022 I don't think it turned out bad at all. Hard to mark stitch lines on a piece like that. Even so, the alignment of the stitching isn't too bad either. Thanks for sharing! Quote
CFM chuck123wapati Posted January 4, 2022 CFM Report Posted January 4, 2022 Not to bad at all, that stitching does stick out but the color is fine imo, nothing wrong with that. Quote
Members Bert03241 Posted January 4, 2022 Author Members Report Posted January 4, 2022 Thanx guys appreciate the comments Quote
Members HandyDave Posted January 5, 2022 Members Report Posted January 5, 2022 I really like the bold bright look of it. Its deffently not run of the mill. Now when you say faux snake skin. Is it real leather thats embossed with snake skin pattern? Or faux leather all together? Quote
Members Bert03241 Posted January 5, 2022 Author Members Report Posted January 5, 2022 No its not real leather, not sure what its made from, I glued it to so veg tan tho. I have ordered real snake skin hide for the next on. Quote
.thumb.jpg.be873fe3cafed424774b187cfb1a470f.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.