Bert03241 Report post Posted January 4, 2022 I got a couple sq's of this faux Rattle Snake Skin. Wanted to see what it looked like and how it would form for molded knife sheaths.Glued and stitched to 5 to 6 oz Veg tan. The sq's were cheap so I didn't expect much. But it didn't turn out to bad. I'll probably get some flak on my choice of thread but thats OK . Quote Share this post Link to post Share on other sites
PastorBob Report post Posted January 4, 2022 I don't think it turned out bad at all. Hard to mark stitch lines on a piece like that. Even so, the alignment of the stitching isn't too bad either. Thanks for sharing! Quote Share this post Link to post Share on other sites
chuck123wapati Report post Posted January 4, 2022 Not to bad at all, that stitching does stick out but the color is fine imo, nothing wrong with that. Quote Share this post Link to post Share on other sites
Bert03241 Report post Posted January 4, 2022 Thanx guys appreciate the comments Quote Share this post Link to post Share on other sites
HandyDave Report post Posted January 5, 2022 I really like the bold bright look of it. Its deffently not run of the mill. Now when you say faux snake skin. Is it real leather thats embossed with snake skin pattern? Or faux leather all together? Quote Share this post Link to post Share on other sites
Bert03241 Report post Posted January 5, 2022 No its not real leather, not sure what its made from, I glued it to so veg tan tho. I have ordered real snake skin hide for the next on. Quote Share this post Link to post Share on other sites
.thumb.jpg.be873fe3cafed424774b187cfb1a470f.jpg)