Rylas

This has been sold.

I have an Osborne no. 84 Splitting/Skiving Machine for sale. It has an 8 inch blade and is in excellent condition. I got it originally for making belts, but the business ended up going in another direction (wallets mainly) before that happened. Aside from a few test pieces that were created with it, it's basically brand new. At any rate, I'm sure someone else would be able to appreciate it more fully and make better use of it. Let me know if you're interested or if you have any questions! Shipping: $20 Anywhere within the contiguous US (contact if in Alaska or Hawaii for shipping rate) Price: $550 or best offer (payment handled through Paypal)

These have been sold!

Hey Guys, I have two sides of very clean 8-9 oz. Aniline Chromexcel for sale. I had sold two of these previously, but these remaining two have been sitting around since then and I'm willing to part with them for less than the previous sides just to move them and free up space. Here's the details on each of the sides: SIDE ONE (13.4 lbs.) $120.00 (plus shipping) Very clean side, with no marks or scratches, but has a couple of words written on the back (near the top of the side) in pen (picture with fingers for scale attached). This should come off with even slight sanding or skiving. 8-9 oz. (closer to 8) 19 sq. ft. SIDE TWO (15 lbs.) $120.00 (plus shipping) Very clean side, with no marks or scratches. It has a 2" x 50" piece cut from the top edge, but is otherwise fully intact. 8-9 oz. 20 sq. ft. SHIPPING INFO $45 shipping for one or both sides Payment accepted through Paypal. Let me know if you have any other questions!

Sorry I missed this last post. I never received a notification about it. Yes, sides 3 and 4 are still available, but I do have another potential buyer who just contacted me. I suppose it’s only fair that whoever jumps on them first will get them.

That looks awesome! Nice to see the leather being put to good use!

Glad you like them Jeff! It was good meeting you and I hope you have fun with the leather!

Sides 3 and 4 are still available!

Yeah, I'd be willing to do that. I'll send you a private message.

It means that some of the oil and wax has risen to the surface. You can very easily buff it away if that's not a look you're going for, but It's very desirable to a lot of belt makers. As for location, I'm in Colorado Springs.

These are still available if anyone is interested. I'm willing to entertain offers.

Actually, I was just having a look and it's not as bad as I thought to Canada. It looks like it'd be $70 shipping to Ontario for up to two sides. If you're interested in more than that I can take a look too. Let me know!

I'm in Colorado. Sorry, I forgot to mention that I'd prefer just shipping inside the US.

Hey Guys, I have four sides of very clean 8-9 oz. Aniline Chromexcel with strong bloom for sale. Here's the details on the individual sides: SIDE ONE (12.6 lbs) $150.00 (plus shipping) Very clean side, with no marks or scratches 8-9 oz. 18 sq. ft. SIDE TWO (16 lbs.) $170.00 (plus shipping) Very clean side, with no marks or scratches 8-9 oz. 20 sq. ft. SIDE THREE (13.4 lbs.) $155.00 (plus shipping) Very clean side, with no marks or scratches, but has a couple of words written on the back (near the top of the side) in pen (picture with fingers for scale attached) 8-9 oz. (closer to 8) 19 sq. ft. SIDE FOUR (15 lbs.) $150.00 (plus shipping) Very clean side, with no marks or scratches, but has a 2" x 50" piece cut from the top edge) 8-9 oz. 20 sq. ft. SHIPPING INFO $45 shipping for 1 or 2 sides $90 shipping for 3-4 I'll ship it in two boxes Payment accepted through Paypal. Let me know if you have any additional questions!

This one is gone.

Done and Done!

Hey Guys, My wife and I are cleaning out our shop and we wanted to offer this Vergez Blanchard Stitching Clam to anyone who is interested. We bought it from Rocky Mountain Leather Supply in the Spring, but I found that I preferred my old stitching method and so this has barely been used. The leg is completely untouched, so you can cut it to whatever length suits you if that's your preference. At any rate, we're offering this for $100.00 including shipping for anyone in the US. We should be able to ship it by the end of the week since we ordered a long box just for this purpose. Thanks! Joe

Hi Guys, My wife and I are moving away from steel dies in our workshop and we're looking to free up some space by selling off our leather press. Just to tell you a bit about it, we bought it back in 2011 from Kirk and Heather at Texas Custom Dies. Its in good functional condition, though some cherry juice can occasionally be found seeping from the jack. It's nothing major, we've just had to wipe it off a handful of times over the years. A replacement can be had easily and relatively inexpensively through Harbor Freight if its any concern. We've disassembled the press in order to move it from our basement to our garage, and we'll leave it for the new owner to put it back together (its very simple and intuitive). Also, just as a note, the cutting board in the second picture is not included. At any rate, we're making this available for $100.00 or the best offer and its available for local pickup in Colorado Springs, CO only. No shipping on this one. Thanks guys! Joe

I'm interested in buying this. I'm going to shoot you an email to see some pictures.

Thank you kindly! Thats what I was looking for!

I believe this is a Filson bag from the looks of it. Anyway, I was wondering what sort of connector that was on the strap and if anyone could tell me a bit more about them and possibly where to find them. Thanks!

I'm new to bridle leather and so I wasn't certain about this. Can you use Sno Seal on Bridle to help protect it, or would there be any negative effects to using it? Thanks!

Hi guys, I'm working on a credit card case and I'd like to use the 4 oz leather I already have to make something really durable. The problem is, that when I open it after wet molding, there are a lot of creases in the spine. Is there anything I can do to minimize this? I have both veg tan and bridle leather available.

This has been immensely helpful! Thank you!

Hi guys, I'm looking to make a briefcase and I'm hoping to put solid brass or nickel (at least I think it's nickel) fittings on it. The local shop only carry's brass and nickel plated things, so I was hoping you might help me find a supplier. I'd like to purchase solid brass or nickel rivets, buckles and line 24 and 20 snaps as well as D-rings, and clasps for attaching the strap to the bag. I'm also looking for a place which sells more neutral colors of marine grade thread so my stitching can be UV and mold resistant. Or is there a better thread to use? I'm new to the world of bags. Also, I was wondering if antiquing the brass myself would have any adverse effects as far as it's durability? Thanks for your help!