husker

I'll also take the Sig P229 if still available as well. I have also PM'd you.

I'll take the Springfield XD sub compact if still available.

These are for casual/dress type gunbelts that is. They are also a sponsor at the top of the page.

I use the #50 type roller buckles from Weaver. I have also bought these from Springfield but Weaver has better prices on them. Very good buckle in my opinion.

The 938 appears to be longer and the slide is different in thickness and height.

I can check for you tonight. I have both and a 938 holster sitting on my bench so I'll see how the 238 fits.

It looks like you need to tighten your top tension some. I cans see the knots being pulled to the bottom. That is the first place I would start. I always flip the reverse lever after my needle has reach all the way down and has risen about a 1/4" back up.

I would say that I have ordered from them a few times a year for the last couple of years and I made a costly mistake once, called them to let them know I made a mistake on custom cut leather strips to just see if they could do anything for me and they were nice as can be. Sent me new leather strips with a prepaid shipping label for me to ship my mistake back to them. That alone made me want to do more business with them. It is unfortunate that this happened and doesn't even sound like the same company I've dealt with.

Wow shoulder surgery now, Didn't you just break your arm also? I think you mentioned it on the phone to me a couple weeks ago when I ordered my new cobra class 4. Best of luck.

Sold

I have a Tippmann Boss for sale that I have used in my shop for holsters and belts for the last couple of years. I bought this machine used locally, the person I bought it from owned a shoe repair store and used it once and then it sat for a long time. It works fine very good, I have had no issues with this machine. I am upgrading to a cobra class 4 so this needs to go. This is the aluminum version I am including: 6 bobbins half a pack of needles original tool box with allen wrenches 3 presser feet drill bobbin winder attachment what I have for 277 thread: brown, black, tan and white edge guide I am asking for $1,000.00 and I'm willing to ship it but at buyers expense. Let me know if you have any questions.

Me too. need to know what model, size.

I also take mine all the way to the end full thickness. I think its just personal preference but I would bet most take it to the end full thickness but I can see the benefits in skiving it down.

I have run into this with the Tokarev dummy gun, the safety was actually in a different location on the gun altogether so I was able to cut it off with a little work and I glued it into place and it has stayed and worked fine since but Its not one that I get a lot of orders for, maybe just a few a year. If I remember right I was able to use a razor blade in a slightly modified window scraper and I heated it up with a lighter and it went through the plastic really smooth.

Alright Particle, I compared it to my Kahr P9 mag and it is the exact same size and dimension (width and thickness) as the P938 mag with the exception of length.