Jump to content

DavidMillsSaddlery

Members
 View Profile  See their activity

  • Content Count

    453

  • Joined

  • Last visited

Everything posted by DavidMillsSaddlery

  1. DavidMillsSaddlery
    I had to spell check! Voice recognition sucks lol
  2. DavidMillsSaddlery
  3. DavidMillsSaddlery
    No I bought mine from a man’s wife… He had recently passed. Morgan has been retained by the way she told me that he bought the machine from the King family in Wyoming, they had rebuilt it is there! I found paperwork with a Cuba New Mexico address on it! Give me a couple of minutes and I’ll try to find it and post it!
  4. DavidMillsSaddlery
    On plate 4 part number 947... can you show me where this goes?
  5. DavidMillsSaddlery
    This “history” sounds a lot like what I was told about my #3! I even found receipts from the Cuba NM shop! I’ve driven through Cuba NM... never would have guessed a shop was there!
  6. DavidMillsSaddlery
    Well I got mine home and unloaded! This piece had fallen off while the previous owner had it! It’s missing a square nut as well! Reverse thread! Not sure if I’ll be able to find one? now I just need to figure out where it goes!
  7. DavidMillsSaddlery
    Find a good used one... no more china!
  8. DavidMillsSaddlery
    Anyone have a video of the back side while it’s working?
  9. DavidMillsSaddlery
    Great! Thank you!
  10. DavidMillsSaddlery
    Thank you John!
  11. DavidMillsSaddlery
    Glen, would you mind making a copy of the manual once you find it? I’ve recently acquired one of these myself! Never mind @shoepatcher I see the link above! is there an operators manual?
  12. DavidMillsSaddlery
    I’ve been able to find a USMC C type clicker! Owner says he’s replaced the motor, and can not get clutch and brake to work right since! Anyone familiar with this machine?
  13. DavidMillsSaddlery
    No, he sold it a while back! I bought some other stuff from him!
  14. DavidMillsSaddlery
    Yes, that’s what it took, moving the bottom out further! I received the manual yesterday, and should have the video that Tony Luberto makes within a day or two… Then I won’t have so many silly questions for y’all!
  15. DavidMillsSaddlery
    There’s no dealers for these Ferdinands or Ferdco! I love the 6/6 you sold me! I do need to see if you have a race cover you can sell me though? This one is bent, and it hangs the hand motion just enough to irritate me!
  16. DavidMillsSaddlery
    These tiny Allen head screws in the bottom... I’ll have to find a Allen head that small somewhere! Ok, so I found a 1/16” Allen head! I took the “bow” out of this plate, by removing the allens, and using the flat head to tighten flush... no change?
  17. DavidMillsSaddlery
    Ferdinand 900b see video!
  18. DavidMillsSaddlery
    Ferdco took machines that were already in production, and improved and modified them to work better with leather!
  19. DavidMillsSaddlery
    I finally heard back from them? They don’t have any parts from previous models! The little bit of inventory they bought is gone! No manuals or anything for past models, they’re just selling the “New” Pro 2000 models!
  20. DavidMillsSaddlery
    Good news! I just got off the phone with Tony Luberto! He said that they did the pin thing at the factory in Idaho on the earlier units!
  21. DavidMillsSaddlery
  22. DavidMillsSaddlery
    I got it figured out! @CowboyBob show me a screen shot of the place you said there was a nut or bolt missing? I have napped since then!
  23. DavidMillsSaddlery
    It’s 1346
  24. DavidMillsSaddlery
    figured it out!
  25. DavidMillsSaddlery
    After my nap!
×
×
  • Create New...