Mariohanel

Thanks, for the responses, I hit it the hand wheel with a block of wood and a heavy hammer the opposite direction I was turning the wheel when it locked up, now it is turning as it should. Thanks for the help.

I made the rookie mistake and turned the top hand wheel to far and it locked up and now it wont turn either direction. How do you get it to turn again?

This machine has been sold.

Very nice machine hope it sells quickly the color you chose looks great on that machine.

Hi ljk, I forgot that I had those machines up there I have since found a machine for that spot in the shop, I would be more interested in a Adler or pfaff cylinder arm, I prefer Adler not shur on all the models, like a 269 or something similar, or another needle awl machine. Thanks for your interest Mario.

I have lowered my price to $4100 with the conversion and $3800 put back to its original state as a treadle, I am also open to partial trades. This machine has been completely gone through and has had most all of the replaceable parts replaced so it is in top notch condition and it makes a gorges looking stitch.

I am looking for a roller foot that fits a juki 411. Thanks Mario

These items have been sold thank you

Lower price to $4300

Sark9, thanks for the response talked to a Mitsubishi rep. today and we don't think it's the synchronizer but the control box and he gave us the name of a place that repairs them. Thanks Mario

I have a juki 441 that is ran by a Mitsubishi limiservo xl-554-20v and I need some information on setting up the synchronizer, I've look on the internet and can't find any detailed instructions on how to do this if anyone could help me with this or tell me where to go to get instruction I sure would be great full. Thank Mario

I am interested if you still have them. I I have pm you. Thanks Mario

This machine has been sold. thanks for looking , Mario.

Yetibelle, no problem maybe you'll run in to one closer to home. Thanks for the interest Mario.

Yetibelle, thank you for the compliment, if you are interested in the treadle I would serperate the head and treadle, or I would even separate the head the table top and treadle pricing them seperatly. I would also crat any of it but the buyer pays and arranges the shipping. Thanks for the interest Mario.

The 111g156 has reverse and will sew close to 1/2 of a inch it's also had a bigger hand wheel add, the treadle has been restored and has a solid oak top made from two boards, it works very well. For a short video go to Hanel's Saddle Shop on fb. The machine is located in Lakeview Or. And I am asking $1250, for more info call Mario at 530-260-0770.

I have a 97-10 hook and race for sale both are in very good shape, they both shows very little use, $225 for the pair and the spar bobbin case. The hook on the right came with the race when I bought it originally it fits the race but is of different design than the 97-10 hook so I'm not shire what it's for, the simanco part number is 19977, $100. The parts are located in Lakeview Or. Thanks for looking my number is 530-260-0770.

Uwe, nice clean machine at a good price, hope it sells quickly, and thanks for the great videos. Mario.

Thanks, Trox and Constabulary for sharing, this will come in handy for reassembly on a juki 441 I have that has a bad bearing. thanks again Mario

I have lowered my price to $ 4400 on this machine.

This machine has been sold. Thanks Mario

Try Keith Palmer in South Dakota 605-261-9695.

I'm sorry I can't get the video to load and I don't know enough about the inter web to link things but I am learning, anyway if anyone wants to see a video for now they will have to go to my Facebook page, Hanel's Saddle shop. Thanks Mario

Thought I would post a video

I have a 97-10 for sale which came from the USFS in Alaska it was, according to the serial number, built in the early 50s. I have had several upper and lower needle guide made by a machinist, a few of them still need polishing because they may have sharp edges, it also comes with a wax pot, a bobbin winder several different needles, a chap table and some small parts, all shown in the photos. Most of the time I use 794 needles with a S point with needle guides made to work with this needle system which makes a very nice stitch on anything under 1/2 inch, above a 1/2 and up to an 1 inch I use a cut down 331 and it sews well, I do have about twenty five 3x97 size 24, ten 4x97 size 24, and a few 4x97 in larger sizes. This machine is in very good working condition. Don't really want to sell but I need a machine with a longer arm. I am asking $1950 obo and it is located in Lakeview Or., I will ship but buyer arranges and pays, any questions please call 530-260-0770.