advansite

looking for a cowboy or artisan 3200 for sale in southern nh area. knife maker looking for a good machine. new is slightly out of my budget.

also looking at cb3200 for $1900 is that the best for the money. but the original post is how easy is it to change to tighter stitch / smaller thread to do wallets and then back to max for sheaths

how good is the juki ls 341 for leather sheath

Paul Long talks about using jb weld instead of a rivet for his clips . anyone know how that is done ?

how thick do u use. is 2.5 to thick ? is chrome tanning OK ?

anyone know of a good source for deerskin. what thickness for liner. does it matter if it is chrome tanned

would u take 75 for the set of paul long dvd

not sure what a wiz sticky is.. i was just referencing i used 1mm by hand.. no thoughts that i can stick that spool on my machine and i am all set my ask is what is a good needle and thread size for a belt and a sheath i appreciate the patience and help by you experienced leather workers

so what is a good thread size and needle size for say a leather belt , or a 3/8 inch thick leather sheath is the needle bigger as the number gets smaller ( size 18 bigger than 23 ) is the thread thicker as the number gets bigger.. I used 1mm tiger thread to hand sew sheaths.. what is close to that in v size.. thanks for all the help .. never touched a sewing machine before

just got a juki lu 563. can not find a good reference for needles and thread for doing leather belts/sheaths. any pointers

does robert beard still exist. can not find their basketweave stamp anywhere. link to the site above works but seems old. email address in contact us does not work

looking for somethings like a tippmann Boss Leather Sewing Machine. needs to cheap/ used and in NH area.