Triple Stitched Halter

[Triple Stitched Halter]

1 hour ago, TomE said:

Thank you kindly!  The direction of the halter snap is debatable.  In my experience, the outward facing snap will catch on hay nets and on woven wire fencing.  We don't normally turn out horses with halters on, but we do use a few grazing muzzles with break away halters (leather crown piece on a nylon halter) for ponies.  These inexpensive halters have an outward facing snap.  I had a pony leave their broken break away halter clipped to the fence today (she was scratching an itch no doubt), and I just finished making a new crown piece for tomorrow's turn out.   So, I think the outward facing halter snaps can be dangerous.  A properly sized throatlatch is roomy, allowing 4 fingers to be inserted between the horse's jaw and the throatlatch.  The snap should rarely touch the horse.

Thank you for the explanation.

[Triple Stitched Halter]

Beautiful as is all your work, but I have a question. The opening of the swivel snap is facing inward. Doesn't that present an opportunity to harm the horse?

[multiple square]

Amazon?

https://www.amazon.com/Combination-Aluminum-Die-Casting-Carpenter-Zinc-Alloy/dp/B09ST7JH73/ref=sxin_17_pa_sp_search_thematic_sspa?content-id=amzn1.sym.749943ff-94bd-4679-8f03-3b5488f65fae%3Aamzn1.sym.749943ff-94bd-4679-8f03-3b5488f65fae&crid=3QFTPGDEUT3EJ&cv_ct_cx=combination+square&keywords=combination+square&pd_rd_i=B09ST7JH73&pd_rd_r=a841d05e-d2b2-4b78-98a4-beb3668d1e69&pd_rd_w=03qEC&pd_rd_wg=ZDikM&pf_rd_p=749943ff-94bd-4679-8f03-3b5488f65fae&pf_rd_r=A7GEB13EAXHXS0KWBK58&qid=1687009754&sprefix=combination+square%2Caps%2C183&sr=1-2-2b34d040-5c83-4b7f-ba01-15975dfb8828-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9zZWFyY2hfdGhlbWF0aWM&psc=1

[Tablet case too Small Help]

I say throw it out and start over. Speaking from experience, it is likely that in one of your attempts to force the tablet into the case you will break the tablet.

[Poly Stripe ???????]

It is just some plastic fabric to reduce the bulk of the wallet. Maker's Leather Supply uses, and sells, Tyvek for this purpose.

[Picking leather for a workshop apron]

8 hours ago, DartmouthDuffer said:

Any chance you could link the leather you used here? Really appreciate the input!

I purchased the leather from Maverick Leather, but they no longer sell what I purchased. It was a Golden Rod Dearborn which is described as Glovey/Soft. They currently have four different colors of Dearborn with black the thickest at 6oz. I would consider the other three to be too thin, but you might like it if you think the thicker leather might be too heavy.

[Picking leather for a workshop apron]

3 hours ago, DartmouthDuffer said:

thanks for the post! you don't find 6/7 too heavy? What do you use it for primarily?

The completed apron is only about 2.5 lbs so not heavy at all. I use it primarily when dying, but I wanted something thick enough that it would provide some protection when doing something a bit more intense.

[Picking leather for a workshop apron]

I made my first apron with vegetable tanned leather. I found this to be too stiff and uncomfortable. Every time I bent or sat down, the leather did not want to do the same. I thought it would break in in time, but it never did.

I made a second apron with the same pattern, but this time I used a soft 6/7 oz chrome tanned leather for the body. This one is comfortable, bends with me, and I wear it exclusively over the vegetable tanned.

["Hand of God" holster commission -- in progress]

12 minutes ago, Chux said:

Ok, I'll bite...what movie?? 

3:10 to Yuma. Worn by Russell Crowe in the film.

And the pattern is by Will Ghormley.

[How to make a USGI M1916 leather holster?]

8 hours ago, AlZilla said:

Nah, the last time I looked at prints larger than 11x17, it was $50 or $75. Not that I want to make that particular holster, I was just curious in general.

I was a bit curious about this so I checked with FedEx Office. For an A0 print (approx. 3'x4') their price is $9. 

[Rifle stock cover and scope caps]

52 minutes ago, Ddat said:

Yep that's right. Tried to get Angelus dyes and paint... They can't ship to a California address.

Wow, you are right! I used to buy Angelus dye until they stopped selling it in pints. Just checked and they no longer ship to California. 

[Rifle stock cover and scope caps]

3 hours ago, Doc Reaper said:

So what. Dye is allowed in California, is it pro dye or the NON-pro dye. And who is making such odd decisions for free citizens???????

The problem is the VOC level. This is limited by the California Air Resources Board (CARB). 

Quote

Due to VOC regulations in the state of California this item cannot be shipped to a California address.

Please do not add it to your shopping cart if you have a California shipping address – the order will not be fulfilled.

Fiebing's Pro dye is a definite no no. For the Leather Dye, some online vendors will sell it, others will not.

There is a similar problem with the Fiebing's Antique Paste. Some vendors will sell it, others will not.

 

[Design software for pattern making?]

I use Fusion 360. While it is not designed for this purpose, there are videos on YouTube that explain how it can be used to make leather patterns.

As long as you are not a professional and do this only as a hobby, Fusion 360 is free. If you are a professional, look elsewhere.

[Retiring! Selling off Blueguns]

I received the M&P Shield blue gun today. Looks great.

Thanks for a good deal.

[Retiring! Selling off Blueguns]

Interested in the S&W M&P Shield. Message sent.

[Thumb hole sling]

9 hours ago, Chux said:

Thanks for the replies. If I'm "understanding" things the hole in the sling isn't for stability when shooting, just for carrying the rifle?

Yes.

[Thumb hole sling]

24 minutes ago, Chux said:

I like it, but...why the thumb hole??

I put a thumb loop on my shotgun sling and I like it. It allows me to hook my thumb in the loop and relax my hand and arm while stabilizing the sling and preventing the shotgun from sliding back.

[How to make this Folder]

I was in the same boat. I wanted to make a portfolio but needed a primer as to how it goes together.

I purchased portfolio 9B from Holly at https://www.leatherdiystudio.com/product-page/portfolio-no-9. Once I made one from her pattern, I was able to design my own with a different interior layout.

[Joe Meling drawing course or Don Gonzalez drawing Ebook/course?]

I purchased Don Gonzales's Introduction to Leather Floral Design eBook for $20. While it is not bad, he has a YouTube video that covers the exact same information.

[Anti slip for shoulder strap / gun sling?]

I line the back of the sling with suede. It provides grip and a padding for the shoulder.

[looking for GOOD men's acrylic wallet templates]

If you have a 3D printer you can just print your own for a lot cheaper than someone else's acrylic set.

[That little shield you use when removing your stitching chisel ...]

I use a wooden paint stirrer. It is free, light, and when working in a narrow area, can be used on its side.

[Blue guns/dummies for 1911 and G17]

7 hours ago, JLSleather said:

that design look a  bit familiar ..

 

It can't be too bad if you can recognize it. Great tutorials for both the pancake and avenger. Thank you for making them available.

[Blue guns/dummies for 1911 and G17]

While I printed several guns and made holsters, I only reality tested the Glock 17. Here is a holster I made from the printed model with a real Glock 17 in it. I assume the others are as accurate.

[Blue guns/dummies for 1911 and G17]

If you have a 3D printer you can download the stl files for both from thingiverse.com.