-
Content Count
1,447 -
Joined
-
Last visited
Posts posted by tsunkasapa
-
-
On 4/19/2024 at 5:28 AM, chuck123wapati said:cool fact!!! not a story, none is the answer if done correctly no glue is needed.
, sorry I'm out you obviously got er all knowed up.
Yes, obviously WE have been doing it wrong all these decades.
-
On 4/14/2024 at 1:35 PM, thekid77 said:Thanks for the tip! I have been stitching using poly and burning the ends for more than a decade.....linen *has* come undone for me and I have done exactly what you've recommended.....I've seen some type of white glue being used by different people all over the place.....my guess is because it works....
Linen saddle stitch can work itself free on an item with use...
Going back to my question....
I was asking what type of glue people use to finish linen after backstitching...
Thanks again for the advice!
until the thread works itself loose
In 35 of saddle stitching, I have never had the backstitching work loose. And that includes collars and harness repairs for working sled dogs. And those guys give those items some serious use.
-
-
I use Saddle Tan on 95% of my projects. It's been my go to for years.
-
That is exactly what it's all about.
-
It shows he was on here yesterday, but I haven't seen anything that he's posted since January.
-
11 hours ago, Handstitched said:I'm still here, still having issues with ISP. Still dealing with communication authorities.....gggrrr
Stoopud teknologee! This stuff is supposed to make life EASIER.
-
Saw this on Face Book. It didn't seem to be getting much traction there either.
-
16 hours ago, jrdunn said:Yup, 60's. I blame most of my shortcomings on that now days.
I blame a lot on THE 60s. And the 70s are pretty fuzzy as well.
-
I left mine raw wood. But I have 24x32 marble slab and a 24x36 cutting board, so very little wood shows.
-
Al Stohlman's book shows ow to design them from scratch.
-
-
I've never dealt with Alum tanned other tan boot laces. And as I said, I don't use 'sealers'. But try the resolene on some scrap. Sno Seal might be an option as well.
-
As to resolene, I can't say. I never us it. But black dye is notorious for 'perpetual' rub off. On a sheath, holster or other small project it is possible to buff it out. But something like a jacket, I don't know. I would point out that the leather was most likely dyed with an aniline dye rather than an oil dye like Pro Dye.
-
A friend of mine made his black powder shooting bag and knife sheath out of latigo. The color rubbed off and ruined his brain tan buckskin pants. I don't think any sealer will stop it if there is any surface friction. Myself, I avoid latigo for anything that comes in contact with clothes or upholstery.
-
8 hours ago, Dwight said:Not at all. Those kinds of A-holes are far too common today. Come out and stand on the road with my people and I, just for a morning. Year before last I drug a guy half way out of is car window for verbally abusing on of my girls. All she did was stop traffic from his direction. Would have pulled him all the way out, but his belt hung up. All in all, I hate people.
-
5 hours ago, Mablung said:As the quip goes about men telling their wives how many guns they need: “Just one more.” Same applies to knives, lol. I have a whole variety of knives, leather and non-leather. One cannot have too many knives, even if only a few are carried regularly
I av so many firearms and knives now that when the wife asks, I just reply "Oh, that? I've had it for years."
-
2 hours ago, Mablung said:Holy crap does the backside stitching ever look terrible--maintaining a proper angle with the awl is hard!
Yes, that is important, but the geometry of your awl will affect that as well. If one (or more) of the 4 planes on your is off from the rest it will cause your awl to not want to travel straight through. I hope I explained that clearly, I don't do diagrams on a computer.
-
I tried that pierced thread thing once, about 25 years ago. Never did it again. I have found it to be totally unnecessary. YMMV
-
Based on your photos it is definitely a dull edger. And the line on the face is from a sharp point or edge scratching the leather.
-
Brain 'tanned' leather is not truly tanned. The hide has not been altered. It is more like softened rawhide with the fats from the brain mixture infusing it. And unsmoked BT will revert back to rawhide if it gets wet and dries unless it is worked until dry. The smoke does not waterproof it but allows it to dry and remain flexible.
Chemical/chrome and even vegetable tanning actually changes the nature of the hide. As I said above, I wash my buckskins in the washer and tumble dry with no heat (as with wool, this avoids shrinking) and there is no stiffening. You can smoke chemical tanned skins, but all you will get is smokey smelling skins.
I'm not a chemist by any means. But I have been a Men's Traditional dancer and fur trade reenactor for the greater part of my life and that is just my experiences with buckskin of both types.
-
3 hours ago, deboardp said:I can't backstitch with my Cobra Class 26 - it goes sideways on me. 3 layers of veg tan, but I can spin the work 180 with the needle down and then do 2-3 stitches.
I only hand stitch. I have a machine that I have never used...other than a place to stack stuff.
-
5 hours ago, Gosut said:Before anyone points it out, this is one of those ideas that could easily turn into spending ten dollars to save one, all for a work surface that's not fit to tool on
Go to a company that installs marble/granite counter tops. Most of them will let you pick through the 'bone pile'. My son got me a 24"x32" bench slab and a 12"x12" portable one for free.
-
PSSSST!! Wanna buy some tokonol?
Busting my Older Years
in All About Us and Off Topic
Posted · Report reply
That's why we have grandsons!