Doc Reaper Posted March 25, 2022 Report Posted March 25, 2022 this is what happens when ya leave folks with their own thoughts, I made a Tandy tool better by trading a plastic part and making it stainless steel Quote Doc Reaper
Members TomE Posted March 26, 2022 Members Report Posted March 26, 2022 That's some nice machining. You must have quite a shop. Does it work for alcohol based dyes? Quote
Members dikman Posted March 26, 2022 Members Report Posted March 26, 2022 Very nice job Doc. Especially cutting all those grooves! Quote Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500. Chinese shoe patcher; Singer 201K (old hand crank)
kgg Posted March 27, 2022 Report Posted March 27, 2022 On 3/25/2022 at 11:51 PM, Doc Reaper said: I made a Tandy tool better by trading a plastic part and making it stainless steel Expand That edge dye roller looks really nice. kgg Quote Juki DNU - 1541S, Juki DU - 1181N, Singer 29K - 71(1949), Chinese Patcher (Tinkers Delight), Warlock TSC-441, Techsew 2750 Pro, Consew DCS-S4 Skiver
CFM chuck123wapati Posted March 27, 2022 CFM Report Posted March 27, 2022 heck yea !!!!! Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
Members Handstitched Posted March 28, 2022 Members Report Posted March 28, 2022 Thats just pure genius. How was that made ? Are you going to market them? Quote ' I have a very gweat friend in Wome called Biggus Dickus, He has a wife you know, do you know whats she's called? Incontinentia.......Incontinentia Buttocks '
Doc Reaper Posted May 5, 2022 Author Report Posted May 5, 2022 (edited) On 3/26/2022 at 3:11 AM, TomE said: That's some nice machining. You must have quite a shop. Does it work for alcohol based dyes? Expand I ordered some replacements from a supplier, I asked if it was possible to just get the wheel part, it was costly but the ones tandy supplied got damaged with time. The rubber part allowed die to get under it and made it lumpy. I think it was SLC I found edge rollers and asked if they could send just the wheel part i was surprised to find a full metal piece, a little sanding on the spindle to fit and I was good to go it will use anything I pour into the reservoir Edited May 5, 2022 by Doc Reaper Quote Doc Reaper
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.