Juki… consew

[Rustic]

Both in good shape… juki lu562 or consew 226?

[Constabulary]

Basically the same machine (both based on Singer 111) but w/o having seen them / tested them / knowing details like motor and accessories I´d choose the one with reverse or if both have reverse I personally would choose the JUKI.

Edited April 25, 2022 by Constabulary

[kgg]

7 hours ago, Rustic said:

juki lu562 or consew 226?

Both the Juki LU562 and Consew 226 have reverse. The Juki LU562 it is a compound feed but has a small " G" bobbin whereas the Juki LU 563 would have the larger "M" bobbin. The Consew 226 if it isn't badged as "226R" is the an older version before they started to indicate that the machine had reverse. If the Consew doesn't have reverse it would be a Consew 225.

If both are in the same condition I would always choose a Juki over a clone as it will be easier to get parts and to resell later on.

kgg

 

[kgg]

8 hours ago, Rustic said:

Both in good shape…

What are they asking for the machines?

kgg

[Rustic]

2 hours ago, kgg said:

What are they asking for the machines?

kgg

$550 each

 

[kgg]

10 hours ago, Rustic said:

$550 each

Decent price, $550 ( ~$430 USD). Any photo's as someone may spot something to ask about with the machines.

kgg

[327fed]

Table and motor? 

[MtlBiker]

15 hours ago, kgg said:

Decent price, $550 ( ~$430 USD). Any photo's as someone may spot something to ask about with the machines.

kgg

Do you have reason to think the $550 is Canadian dollars?  He doesn't list his location in his profile.  So it's either $430 US if his $550 is Canadian, or $700 Cdn othewise. 

 

[kgg]

4 minutes ago, MtlBiker said:

Do you have reason to think the $550 is Canadian dollars?

I might have gotten OP confused with someone else's location. But the used price in US dollars for the Consew falls in roughly the 30 percent mark of a new comparable machine. While the Juki is running at about 25 percent of a new comparable machine.

kgg

[Northmount]

7 hours ago, kgg said:

I might have gotten OP confused with someone else's location

Rustic is in South Dakota according to the IP Address.

[Rustic]

I ended up getting the juki, it has a green table with a servo motor…  probably paid a little more than its worth. But it works fine.

 

[kgg]

3 hours ago, Rustic said:

I ended up getting the juki, it has a green table with a servo motor…

Way to go. Post a couple photo's.

kgg

[suzelle]

5 hours ago, Rustic said:

I ended up getting the juki, it has a green table with a servo motor…  probably paid a little more than its worth. But it works fine.

 

Rustic, Congrats on purchasing the Juki! Wishing you many good days sewing!

[Rustic]

12 hours ago, suzelle said:

Rustic, Congrats on purchasing the Juki! Wishing you many good days sewing!

Image too large?

[Wizcrafts]

1 hour ago, Rustic said:

Image too large?