Members Davm Posted June 7, 2022 Members Report Posted June 7, 2022 I want a way to lace the edge of a knife sheath or holster and cover the edge. The Tandy Double Loop- I don't like that stitch because tere is a single long section to the hole and all the lace material is bunched together outside of the edge- if that makes sense. Is there some type of a stitch with lace that stays closer to the edge and covers it up better? Thanks. Quote
CFM chuck123wapati Posted June 7, 2022 CFM Report Posted June 7, 2022 (edited) here is some good info. you may be able to find these free in an e book somewhere. I downloaded them off Tandy a while back when they were free. in the "how to lace" book there is a Mexican basket weave that may suit your project. https://tandyleather.com/products/lacing-stitching-for-leathercraft-book?_pos=2&_sid=041795035&_ss=r or https://tandyleather.com/products/how-to-lace-book?_pos=1&_sid=b3cce9f3b&_ss=r Edited June 7, 2022 by chuck123wapati Quote
Contributing Member LatigoAmigo Posted June 7, 2022 Contributing Member Report Posted June 7, 2022 (edited) @Davm Give this a gander... Bruce_Grant_Round_Edge_Braids.pdf Edited June 7, 2022 by LatigoAmigo Quote
Members Davm Posted June 8, 2022 Author Members Report Posted June 8, 2022 Thanks I'm going to try the Bruce Grant methods, I think that is what I am looking for. As I said the Tandy method leaves a lot of material really above the edge with the lace then protruding by itself to the holes- if that makes sense. Quote
CFM chuck123wapati Posted June 8, 2022 CFM Report Posted June 8, 2022 42 minutes ago, Davm said: Thanks I'm going to try the Bruce Grant methods, I think that is what I am looking for. As I said the Tandy method leaves a lot of material really above the edge with the lace then protruding by itself to the holes- if that makes sense. i am glad you found your answer, some info ,those aren't Tandy methods. They are books on the subject sold by tandy. the Mexican basket weave is what the Bruce grant link shows or is very similar. the book "how to lace" has about 15 different lacing techniques. Good luck and post an awesome picture of your project. Quote
Members Davm Posted June 9, 2022 Author Members Report Posted June 9, 2022 Well, last night I tried method one and that's more of what I want, the entire edge pretty much covered with the lace. I used leather rather than rawhide. I noticed the page was 296 so what book was it from and is the book worth buying? The only book I have right now is a Tandy leather work manual which is about 1/2" thick, are there any more extensive leather work books covering more aspects? And, thanks again. One reason I like the rawhide is that the contrast is nice and rawhide is tough but with multiple wraps of leather lace- it seems it ought to last a long time. Quote
Contributing Member LatigoAmigo Posted June 9, 2022 Contributing Member Report Posted June 9, 2022 1 hour ago, Davm said: what book was it from From this book, the "Encyclopedia of Rawhide and Leather Braiding." A classic, this is considered to be "the" book by "the" master of leather braiding. Encyclopedia_of_Rawhide_and_Leather_Braiding.pdf Quote
Members TomE Posted June 9, 2022 Members Report Posted June 9, 2022 2 hours ago, LatigoAmigo said: From this book, the "Encyclopedia of Rawhide and Leather Braiding." A classic, this is considered to be "the" book by "the" master of leather braiding. Encyclopedia_of_Rawhide_and_Leather_Braiding.pdf 648.48 MB · 3 downloads Thanks for the link! Quote
Members Chakotay Posted June 9, 2022 Members Report Posted June 9, 2022 Not laced like you were looking for, but here's another method for covering an edge: Quote
Members Davm Posted June 10, 2022 Author Members Report Posted June 10, 2022 Well last night I tried the second method and I like it better in the respect that you start at one end and continue the the far end and are done and it covers both sides of the edge very well. Thanks once again. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.