CFM chuck123wapati Posted July 4, 2022 CFM Report Posted July 4, 2022 1 hour ago, Frodo said: Forearm cuffs looks fine to me Quote
Members Sheilajeanne Posted July 4, 2022 Members Report Posted July 4, 2022 (edited) Us archery folk would call those bracers! Nice work! Edited July 4, 2022 by Sheilajeanne Quote
Contributing Member fredk Posted July 4, 2022 Contributing Member Report Posted July 4, 2022 Nice work, especially on the 'Dragon Scales'. Anything like that is not easy to keep aligned. I think I saw these, or something like them. before as I then went and bought the 'Dragon Scale' stamp Not much difference between 'Cowboy Cuffs' and Archery Bracers The only difference I would do is make those straps of a thinner leather and skive both ends of them as well Quote
Members Hags Posted July 4, 2022 Members Report Posted July 4, 2022 Welders like them as well. They just need to overlap so the hot stuff doesn't get inside. Quote
Contributing Member fredk Posted July 5, 2022 Contributing Member Report Posted July 5, 2022 2 minutes ago, Hags said: Welders like them as well. . . . mmm, interesting. I never even thought of that. That might be a whole new market. We have several extremely large engineering companies here, The welders usually wear large leather gauntlet type gloves with a gauntlet cuff that goes up to their elbow Quote
CFM Frodo Posted July 5, 2022 Author CFM Report Posted July 5, 2022 (edited) 3 hours ago, fredk said: mmm, interesting. I never even thought of that. That might be a whole new market. We have several extremely large engineering companies here, The welders usually wear large leather gauntlet type gloves with a gauntlet cuff that goes up to their elbow Welders use what is called sleeves or half sleeves suede splits $35.00--$65.00 on line Edited July 5, 2022 by Frodo Quote
Members PastorBob Posted July 5, 2022 Members Report Posted July 5, 2022 Nicely done. I really like the color you chose as well. Quote
CFM chuck123wapati Posted July 5, 2022 CFM Report Posted July 5, 2022 13 hours ago, fredk said: mmm, interesting. I never even thought of that. That might be a whole new market. We have several extremely large engineering companies here, The welders usually wear large leather gauntlet type gloves with a gauntlet cuff that goes up to their elbow Quote
CFM Frodo Posted July 5, 2022 Author CFM Report Posted July 5, 2022 They have all kinds of leather in a welding shop you have just the sleeves the sleeves with a strap connects each across your back leather full shirt leather half shirt r half or left half aprons chaps elbow welding gloves Quote
CFM chuck123wapati Posted July 5, 2022 CFM Report Posted July 5, 2022 22 minutes ago, Frodo said: They have all kinds of leather in a welding shop you have just the sleeves the sleeves with a strap connects each across your back leather full shirt leather half shirt r half or left half aprons chaps elbow welding gloves i spent a summer or two in a set of those lol. not fun at 90 degrees. i just wear the upper half shirt when i wear one at all. Quote
CFM Frodo Posted July 5, 2022 Author CFM Report Posted July 5, 2022 Picture this My boss was about 6'8'' Big ole country boy, his hands were as big as a dinner plate I was at the jack stand cutting holes with a torch in 4'' angle iron for 1/2'' all thread to go through.Boss walks up and is standing there, He takes a wad of red man and shoves it in his mouth. I look down and he is standing on the cherry i just cut out. Smoke is boiling up from under his boot. I said Hey Boss. you might want to spit that chew out on your boot. He looked down and did a one legged diddy dance DAD DMANIT ! I JUST BOUGHT THEM DAD DAMN BOOTS Next time do not bird dawg the welder BOSS Quote
Members Hags Posted July 7, 2022 Members Report Posted July 7, 2022 I like that! Most of the time it's just too dang hot for all the jackets and stuff. I was a welder in Texas, we just wore long sleeve wrangler denim shirts with heavy starch. A cuff that went under your elbow for passing would have been great. I put a knee pad under mine if I had to learn on it for a while. Quote
Members Sheilajeanne Posted July 7, 2022 Members Report Posted July 7, 2022 On 7/5/2022 at 10:50 AM, Frodo said: Picture this My boss was about 6'8'' Big ole country boy, his hands were as big as a dinner plate I was at the jack stand cutting holes with a torch in 4'' angle iron for 1/2'' all thread to go through.Boss walks up and is standing there, He takes a wad of red man and shoves it in his mouth. I look down and he is standing on the cherry i just cut out. Smoke is boiling up from under his boot. I said Hey Boss. you might want to spit that chew out on your boot. He looked down and did a one legged diddy dance DAD DMANIT ! I JUST BOUGHT THEM DAD DAMN BOOTS Next time do not bird dawg the welder BOSS LMAO!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.