Jump to content

Recommended Posts

  • Members
Posted
6 hours ago, Rubicon04 said:

So just wanted to update this thread with where I'm headed. 

Pretty set on a Cowboy CB4500, more than likely from Bob @CowboyBob. I need to find some time to call him. 

I was not planning to get the accessory package with it and instead purchase the following:

  • HE Precision #25 Xtreme Narrow Needle Plate & Feed Dog
  • HE Narrow Presser Foot Set
  • HE Left Presser Foot
  • HE Lift Handle Extension
  • Drop down roller edge guide - have not decided which one yet
  • Needles - Schmetz 794 S NM 160 #23 & 24
  • Needles - Schmetz 794 LR NM 160 #23 & 24
  • Thread - Amann Serafil in Tex 135 & 210
  • Extra Bobbins
  • Flattop conversion from Toledo

Is there anything else I should look at ordering so I'm ready to get sewing right away? 

 

As for the other machines, I am pretty certain a Juki 1541S and a bell skiver will be my next in line. Probably a bell skiver first but it may be awhile since i am interested in the FAV AV2.  

Something to consider is depending on the drop down guide are if the holes are in the machine and getting the bracket for it. I'm kind of on the fence about the table, I believe they might be on this site is the aluminum tops that have a fence that's adjustable that most people say is easier to take on and off than the wood one. I got the wood one then seen the other one is why.

  • Contributing Member
Posted
2 hours ago, Burkhardt said:

Something to consider is depending on the drop down guide are if the holes are in the machine and getting the bracket for it. I'm kind of on the fence about the table, I believe they might be on this site is the aluminum tops that have a fence that's adjustable that most people say is easier to take on and off than the wood one. I got the wood one then seen the other one is why.

Do you have a link to that aluminum top?

Posted

Juki DNU - 1541S, Juki DU - 1181N, Singer 29K - 71(1949), Chinese Patcher (Tinkers Delight), Warlock TSC-441, Techsew 2750 Pro, Consew DCS-S4 Skiver

  • Members
Posted
1 hour ago, kgg said:

Those table tops are for your LS-341 / LS-1341 and clone machines like the CB341 and Techsew 2750.

kgg

There's a choice of machine drop down menu for a bunch of different machines.

Posted
5 hours ago, Burkhardt said:

There's a choice of machine drop down menu for a bunch of different machines.

I missed the one for the 441 class.

kgg

Juki DNU - 1541S, Juki DU - 1181N, Singer 29K - 71(1949), Chinese Patcher (Tinkers Delight), Warlock TSC-441, Techsew 2750 Pro, Consew DCS-S4 Skiver

  • Members
Posted

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...