CFM Frodo Posted August 16, 2023 CFM Report Posted August 16, 2023 Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles Stand your ass up during the National Anthem
CFM Frodo Posted August 16, 2023 CFM Report Posted August 16, 2023 The letter I. Makes a nice border stamp Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles Stand your ass up during the National Anthem
CFM Frodo Posted October 23, 2023 CFM Report Posted October 23, 2023 On 5/31/2023 at 7:48 AM, chuck123wapati said: yea I think i posted this. Still have not achieved the 3 D look that you did. But while trying to pull it off I came across something rather interesting but, I need you to pick up where I am leaving off and take it all the way I made a double using c-830 and c-429 can you try and make both designs 3-D? I think it will be rather bad ass Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles Stand your ass up during the National Anthem
CFM Frodo Posted October 27, 2023 CFM Report Posted October 27, 2023 Rifle sling I am working on using that design. Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles Stand your ass up during the National Anthem
CFM chuck123wapati Posted November 28, 2023 CFM Report Posted November 28, 2023 On 10/27/2023 at 12:34 AM, Frodo said: Rifle sling I am working on using that design. i think i can see what you are getting at, I'll give her a go. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
CFM Frodo Posted November 28, 2023 CFM Report Posted November 28, 2023 Cool. It is a challenge for sure Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles Stand your ass up during the National Anthem
CFM Frodo Posted December 2, 2023 CFM Report Posted December 2, 2023 On 11/28/2023 at 8:10 AM, chuck123wapati said: i think i can see what you are getting at, I'll give her a go. Yeah. I see 2 lines crossing back and forth over eAch other, but I just can not seem to bring out the 3 d effect that you are good at Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles Stand your ass up during the National Anthem
CFM chuck123wapati Posted December 10, 2023 CFM Report Posted December 10, 2023 On 12/2/2023 at 8:32 AM, Frodo said: Yeah. I see 2 lines crossing back and forth over eAch other, but I just can not seem to bring out the 3 d effect that you are good at here ya go sorry for taking so long to respond. Here is the basic pattern i used a camo tool 431 if i remember right. and a 701 shaded beveller. the space between the two camo lines is approximately 1/8". The beveller is used to extend the one curve line to appear its going over the other curve. It doesn't take much to create the effect. I use hand pressure to set the bevel stamp. do one side then turn your piece over and do the other exactly the same. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
CFM chuck123wapati Posted December 10, 2023 CFM Report Posted December 10, 2023 6 minutes ago, chuck123wapati said: here ya go sorry for taking so long to respond. Here is the basic pattern i used a camo tool 431 if i remember right. and a 701 shaded beveller. the space between the two camo lines is approximately 1/8". The beveller is used to extend the one curve line to appear its going over the other curve. It doesn't take much to create the effect. I use hand pressure to set the bevel stamp. do one side then turn your piece over and do the other exactly the same. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
CFM Frodo Posted December 11, 2023 CFM Report Posted December 11, 2023 Wow, thanks, that is kinda freaky looking Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles Stand your ass up during the National Anthem
CFM Frodo Posted December 13, 2023 CFM Report Posted December 13, 2023 Got a job for you If you want it. Tell me how much and I will send it along with the knife remove the scales and replace with a hardwood. Walnut if you have it if not what ever is around Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles Stand your ass up during the National Anthem
CFM chuck123wapati Posted December 13, 2023 CFM Report Posted December 13, 2023 2 hours ago, Frodo said: Got a job for you If you want it. Tell me how much and I will send it along with the knife remove the scales and replace with a hardwood. Walnut if you have it if not what ever is around I have some antler. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
CFM Frodo Posted December 13, 2023 CFM Report Posted December 13, 2023 That’s even better Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles Stand your ass up during the National Anthem
CFM Frodo Posted December 28, 2023 CFM Report Posted December 28, 2023 On 12/13/2023 at 8:01 AM, chuck123wapati said: I have some antler. He backed out a rivet setting tool for a stamp Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles Stand your ass up during the National Anthem
CFM chuck123wapati Posted December 28, 2023 CFM Report Posted December 28, 2023 cool idea with the stamps if you meant I backed out I sent a pm to you. Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
CFM Frodo Posted December 28, 2023 CFM Report Posted December 28, 2023 1 hour ago, chuck123wapati said: cool idea with the stamps if you meant I backed out I sent a pm to you. No!!! Not you, Guy who wanted the handle backed out Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles Stand your ass up during the National Anthem
Members MarshalWill Posted December 28, 2023 Members Report Posted December 28, 2023 3 hours ago, Frodo said: a rivet setting tool for a stamp What rivet setting tool is that? It makes a great stamp. Quote
CFM chuck123wapati Posted December 28, 2023 CFM Report Posted December 28, 2023 57 minutes ago, Frodo said: No!!! Not you, Guy who wanted the handle backed out Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
CFM Frodo Posted December 28, 2023 CFM Report Posted December 28, 2023 51 minutes ago, MarshalWill said: What rivet setting tool is that? It makes a great stamp. It is a tubular peening tool Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles Stand your ass up during the National Anthem
Members MarshalWill Posted December 28, 2023 Members Report Posted December 28, 2023 2 hours ago, Frodo said: It is a tubular peening tool Thanks. It looks good. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.