A couple of questions....

[yuma]

Showing my ignorance here, but if you don't ask, you don't find out....with the trend of leather bags with wooden ends, how is the leather attached to the wood ? is the stitching just for effect ?

Second question.....When wet forming a pouch, I assume any carving or stamping is done first and then positioned accordingly in the former ?

Curiously yours

 

Roger

[kgg]

13 minutes ago, yuma said:

how is the leather attached to the wood ?

I would suspect the leather is glued to the wood with a contact cement type glue and then nailed.

kgg

[fredk]

The stitching near the edge; the leather could have been skived very thin. folded back on itself and stitched. Those big round things which go through the stitching might be some sort of upholstery nail, although a ready rivet stem with head, ie one part of a double-headed rivet, can be used. I've done that on some of my game boards

[fredk]

45 minutes ago, yuma said:

Second question.....When wet forming a pouch, I assume any carving or stamping is done first and then positioned accordingly in the former ?

That is one way. Its easier to work on the leather on the flat. But you may loose some definition in the tooling. 

On this pen case I stamped after it was wet moulded to shape;

[Handstitched]

Well, this is a first for me, I have never seen a bag made with wood incorporated into the design.  I quite like it  

Perhaps some decorative upholstery nails or screws  may also work to attach the leather to the wood, even as an embellishment?  . And I guess the wood component could also  be used as a template for a leather gusset? 

Well done  

@fredk "On this pen case I stamped after it was wet moulded to shape"  . I have done that on some knife cases  with the mold still inside.

HS

Edited June 12, 2023 by Handstitched

[billybopp]

11 hours ago, yuma said:

Showing my ignorance here, but if you don't ask, you don't find out....with the trend of leather bags with wooden ends, how is the leather attached to the wood ? is the stitching just for effect ?

Second question.....When wet forming a pouch, I assume any carving or stamping is done first and then positioned accordingly in the former ?

Curiously yours

 

Roger

 

I'm pretty sure the stitching is either to hold a foldback on the leather, or purely decorative.   I made something similar a few years ago for my sister-in-law as a Christmas present.  I used brass escutcheon pins to secure the leather to the wood.  I don't have much wood working gear, and I would have chosen a different type of wood if I had known just how hard purple heart is!  LOL

- Bill

[yuma]

Thanks to all for their replies.

 

Roger

[kgg]

12 hours ago, yuma said:

how is the leather attached to the wood

Found this as it sparked my curiosity :

Leather Bag with Wooden Sides

https://www.instructables.com/Leather-Bag-With-Wooden-Sides-/

kgg

 

Edited June 12, 2023 by kgg

[Tugadude]

If the look appeals, there are tons of products where you can mix leather with other materials.  The use of wood makes this bicycle bag much easier to make.  Other than appearance, the wood will likely add weight to the product, so if that's a concern then it could be a drawback.  But you could also "hollow out" the wood, leaving a wide perimeter and dishing the wood out towards the center, effectively eliminating a lot of the weight.  If you have a lathe, it would be simple to do.  I've also seen leather and wood used to construct wine bottle carriers and such.  

[Tugadude]

That bike "bag" is one that I found with a quick search on the internet.  What didn't jump out at me was the fact there is zero stitching involved.  Personally, I don't see that as a good thing.  I'd have wanted to stitch the flap at least.  But hey, it shows how someone can complete a fully functional leather project without having to learn how to stitch.  I guess that will appeal to some makers.