Jump to content
SpruceMoose

Anyone else getting sick and tired of paying premium prices and being sent scuffed up lower grade hides?

Recommended Posts

H.O. and W/C both make some very good leather.  They both also have lower "grades", so the name itself isn't the whole story.  But H.O. sells A/B, I have never got them to send JUST "A" grade leather.  Maybe I'm not writing big enough checks, but they will tell you up front if you order (which is min 10 sides), they will send a mix of "A" and "B".  But they will not charge for "A" and not send "A".

MOST distributors are counting on the customer not knowing the difference.  BY FAR THE BEST I've found if you like Hermann Oak but are buying less than 10 sides would be http://www.goligerleather.us/.  Cheryl is quite good and will get you FIRM leather.  They don't con anybody - there IS a markup for their service.  But what you'll get is what you paid for... you'll be happy.  Very nice A-grade Hermann Oak every time I ordered there.

W/C is great leather, for the most part, though I have had a complaint on more than one ocassion.  They offered me a discount on the order.  But like you, I don't want to pay less and get less, I want the GOOD STUFF and don't mind paying the premium price long as I'm getting the premium stuff.  Overall, W/C has been quite good.  But that's ordering DIRECT FROM W/C ... I have ordered from "distributors" who either don't know what top grade is supposed to look like, or more likely , they thought I didn't know.

Here's a pic of some A-grade Herman Oak "holster" leather, just to show what that's SUPPOSED TO LOOK LIKE. Second pic is a closeup of pic 1

 

DSC00844.jpgsh3.jpg

Share this post


Link to post
Share on other sites

Thanks JLS , I appreciate you sharing your knowledge 

Share this post


Link to post
Share on other sites
On 11/15/2023 at 10:04 AM, SpruceMoose said:

 

 

Maybe I'm crazy and my expectations are too high, I was going to buy straight a/b grade but the company owner suggested the a/b branded grade and assured me it was fantastic and it was the exact same quality as a/b hermann oak just with a  brand, But to me this is utility grade with numerous huge drag marks from handling, there's a bunch vertical as well but they blend in with the fat marks, hard to photograph. Dye doesn't hide burnished in markings and scuffs from man handling. 500.00. 

(Note: I am not talking about the brand or the fat marks, this i obviously do not mind as it's part of leather, i buy about 6-10 sides a year over the past decade, but just the quality is getting worse or my luck as well, i just want to pay good money for good leather and am tired of companies saying what's pictured here is the best grade you can buy)

 

_DSC0001-2.jpg

_DSC0009-2.jpg

This is ENTIRELY UNACCEPTABLE.  Somebody sent me that would not have to worry about any more of my time or money.  I wasted quite a bit of time with a couple of US "outlets"... no amount of phone calls/complaints seem to get through to them so finally (and too late, really) just cancelled them from my list of suppliers. 

I'm not afraid to name names -- Weaver took my money ONCE, and never again.  What they sent was SO bad there was no possibility of a mistake. 

And Springfield Leather (MO) would nod and smile to my complaints, then send the same garbage next time.  One side of 5/6 I could literally stretch over an inch with my hands.

And who was that one guy... Robert and I both ordered a couple different cuts to see the quality he was selling when he showed up on this site.  ALL of it was just sad - some of it worked for NOT TOOLED belts, the rest ... just trash.  Didn't even try to send it back or complain,.. just ate the cost and lost the guy's number.

Cheryl at Goliger Leather is quite good (CA, US) though I imagine the shipping to you would be crazy.  Otherwise, H.O. direct has NEVER given me a problem, and almost could say the same for WIckett-Craig.

THE PIECES you show have WAY too many wrinkles.  I expect some of that in the shoulder area, but NOT IN THE  BACK OR BEND. That piece isn't good for anything but maybe a floor covering to wipe your boots on.

Edited by Northmount
Moved JLS comment out of the quoted post to make it obvious who is posting what.

Share this post


Link to post
Share on other sites

This has been discussed quite a bit, but heres a few pics of the leather I get from my supplier in Perth, WA . I bought 4 of these recently.  Torino 4mm D/B . I sometimes get shoulders.  I use these for my belts . The only marking is a branding mark , ' JW or WJ ' .( I keep those in) , and a batch number right at the very edge , and thats it.  I buy around 8-10 of these per year , depending on sales &  demand. 

I've been with the same supplier for many years,  I phone ahead  being so far away , I  tell them what I need. I don't even have to inspect the hides these days like I use to , they were all rolled up and packaged  on the bench ready for me to load into my car.  

HS

(PS: ignore the ' one way ' sign ....that I stole in my ' yoof'  :whistle: ) 

 

Leather Pics Nov. 23 005.jpg

Leather Pics Nov. 23 006.jpg

Leather Pics Nov. 23 007.jpg

Edited by Handstitched

Share this post


Link to post
Share on other sites
On 11/15/2023 at 9:04 PM, SpruceMoose said:

Maybe I'm crazy and my expectations are too high, I was going to buy straight a/b grade but the company owner suggested the a/b branded grade and assured me it was fantastic and it was the exact same quality as a/b hermann oak just with a  brand, But to me this is utility grade with numerous huge drag marks from handling, there's a bunch vertical as well but they blend in with the fat marks, hard to photograph. Dye doesn't hide burnished in markings and scuffs from man handling. 500.00. 

(Note: I am not talking about the brand or the fat marks, this i obviously do not mind as it's part of leather, i buy about 6-10 sides a year over the past decade, but just the quality is getting worse or my luck as well, i just want to pay good money for good leather and am tired of companies saying what's pictured here is the best grade you can buy)

 

_DSC0001-2.jpg

_DSC0009-2.jpg

oh, man, this leather su**s (pardon my french)

feel sorry for u

 

On 11/27/2023 at 1:45 AM, DeWayne Hayes said:

This is a small panel I just bought from Buckleguy of Wicket & Craig carving leather. Some weird black (dye) stains on it. 

I'm going to attempt sending back. This was my first time buying W&C leather but I get now what people mean when they mention W&C leather feels "spongy" to them, or soft. Very pliable - not sure if it would firm up enough after wet forming for holster use, but regardless, I don't want to spend hours working on a project wondering how bad those black spots will show. 

Screen Shot 2023-11-26 at 3.40.34 PM.png


i have always purchased directly from WC, never had such issue

if there are only few black dots, not an issue, just saying 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...