Adler 169

[Sasho]

I came across two 169 adlers for about 600 euros for both of the machines. Some small business that is going bankruptcy sells them 

Went to check them in person 

Machines look quite dirty and neglected as they are no longer in use

 

Everything in terms of parts is there, they move freely and the hook assembly for both of the machines is doing the job of picking thread up. 

The gear belts for both of the machine was looking abit sketchy as they seemed abit narrow for the cogs.

I will really appreciate some thoughts whether I should buy the machines and savе them from going into oblivion or I should stay away and not invest time in restoring them

 

[Handstitched]

If you're uncertain about the belts, perhaps they can be replaced with the proper belts , as it sounds like they were replaced at some point (?)  , I have to wonder why if that is the case. 

Otherwise, if everything is moving freely and the hook is working fine , they may be  worth getting, just  a good clean and service and some TLC. 

Good luck in whatever you decide  

HS

[Michiel]

I think its a good buy.

even if you have to replace the belt.

i once bought one in the same condition (i think) replaced the belt, did all the adjustments by the book and have a great machine.

(but i think: do not fix it when it’s not broken)

kind regards Michiel 

[Sasho]

Hello I've almost restored both of the machines, besides the painting (which I won't bother to renovate) I've put considerable amount of hours cleaning and oiling both of the machines 

 

Both of them work and hook assembly seems in a very good condition 

 

Bevel gears are also great

 

 

Unfortunately while I was cleaning the machines somehow I've lost a bushing 

 

 

I am trying to figure out which part number is it since it's quite confusing 

 

 

Its common in the classes, but I am open to suggestions to diy one by myself 

Providing photos 

 

 

 

Thanks alot! 

[Constabulary]

looks like 992 00 680 0 - ROLLE (roller)

Check with you local dealer or this dealer in Germany. He has a good reputation.

https://liersch.com/online-shop/ersatzteile/duerkopp-adler/10222486-rolle-5-49x9-82x7-1-0992-006800

Seems not to be super expensive. If DIY is an option the measures are in the above listing.

Edited November 30, 2023 by Constabulary