Magnetic bookmark

[Bert03241]

People still read real books

[RockRash]

12 hours ago, CJJ said:

Looks great.  I tried making one of these recently but it didn't come out as good as yours.  my dimensions were off and it just looked a little strange.  Would you be wiling to share your pattern?

I tried doing it with my phone but it won't size right. I'll scan it at work tomorrow and have it available in a pdf tomorrow night. 

[Frodo]

17 hours ago, CJJ said:

Looks great.  I tried making one of these recently but it didn't come out as good as yours.  my dimensions were off and it just looked a little strange.  Would you be wiling to share your pattern?

Cj

Try this

gran a sheet of paper,  I’ll wait…………

got a pen?   A square?   Ok let’s roll

opps.  Got sizzors?

 

cut a 2” x 8” piece

fold in half, mark center

umfold, fold in half the other way 

mark center

draw your center lines using the mark you made

you have a big x on your paper 

on the 2” side of the paper, from center line measure up 1/2”  make a mark

draw a line parallel to the center line

1/2” on both sides of the center line

go back to the center draw a line 1” both sides of center line  

you are looking at a rectangle 

 

Next

from center line, draw a line 2” to the left and right of center

from outside edge to outside edge of your rectangle. Draw a 45 degree line

see my image and cut it out 

[CJJ]

Thanks Frodo I'll give that a try

[RockRash]

Sort it took so long. I'm not very good with computers I still can't figure out how to put it in a pdf and make it work. 

I scanned a copy of the traced pattern and I printed it out it comes out a bit over sized by about a 1/8th of a inch. But it will definitely get you in the ballpark. Oh and I just double checked and I used 1 and 1/8th inch magnets but 1 and 1/4 inch magnets would probably work great on the slightly oversized printed pattern. 

[RockRash]

I can email it in pdf format for anyone that wants it. I just can't get the pdf to work here. Any way if intrested just send me a message. 

 

Also if any decides to make some please post pics I'd love to see your designs.

Edited December 19, 2023 by RockRash

[jrdunn]

Thanks RR.  I'm going to try some after I finish my Christmas rush.