Jump to content

Recommended Posts

I haven't been around here in a while...just wanted to share my latest work, a holster I'm making for a friend. The resist totally failed, but I think I like the finish so far. Not sure if I'll send it out this way but I'll wait until it's stitched up and edged properly and all before I decide.

As an aside, I haven't been doing much leather lately...I've been having problems with my hands for a couple of years now. Last year it got so I couldn't really hold small tools for more very long, much less gripping them while I whack em. Docs don't know what's wrong yet, sooooooo....anybody have any tips for controlling hand pain so's I can stick with this a while longer?

Thanks all...happy pounding!

Amandas Holster_sm.jpg

Share this post


Link to post
Share on other sites

I'm sorry you're having trouble with your hands.  Couple ideas that may help:

  • You can try wrapping your stamping tools in a wrap to increase the diameter.  That can make it easier to hang on to for longer periods of time.  I've heard some people have success using rubber pencil holders.
  • I've seen, but haven't personally used, a leather tattoo machine.  Thicker handle and no cause for pounding /using a hammer.  May be worth a look if the hammer strikes are causing problems.  https://www.blackflagleathergoods.com/leather-tattoo-machine-21grams-leather-goods/

Share this post


Link to post
Share on other sites

I have arthritis in my hands and I use a pain reliever cream Voltaren Arthritis Pain Gel and this helps a lot. 

Share this post


Link to post
Share on other sites

Take your tools to a auto parts store . . .  tell em you want some black rubber tubing . . . 

Check the size with your tools . . . couple feet of it will last you almost forever.

I have  a bunch of tools with rubber on the handles . . . whole lot easier for 79 yr old hands to handle

May God bless,

Dwight

Share this post


Link to post
Share on other sites

I wrap some of my stamps with blue painters tape, a lot to build it up. What resist were you using? I use tan kote, but even with that I don’t let any antique sit for long. I usually wipe it off right away.

Share this post


Link to post
Share on other sites

Thanks for the replies guys. What I'm getting is thicken up the shafts a bit somehow...I'm going to look into some of your ideas. Also, Voltaren...CVS is just down the street.

@ bladegrinder - I've used Fiebings leather sheen as a resist for years, never had a problem before. I don't let antique sit for more than a couple of minutes, two to three, five at the outside, usually also not a problem. I changed leather recently (unfortunately still can't afford Hermann Oak or Wickett and Craig just yet) so I'm thinking that may be responsible.

Share this post


Link to post
Share on other sites
12 hours ago, mikesherman said:

What I'm getting is thicken up the shafts a bit somehow.

Yes, and just keep on going as long as you can!

Share this post


Link to post
Share on other sites

To make my tools more comfortable, I've been using wine corks (I have an endless supply).  I just drill an appropriate sized hole through the center and push it onto the tool.  Usually that is all I need, but I have had a couple where I had to add a drop of glue to keep it from sliding down.

    /dwight

Share this post


Link to post
Share on other sites
On 5/2/2024 at 4:23 PM, DwightT said:

To make my tools more comfortable, I've been using wine corks (I have an endless supply).  I just drill an appropriate sized hole through the center and push it onto the tool.  Usually that is all I need, but I have had a couple where I had to add a drop of glue to keep it from sliding down.

    /dwight

Nice tip Dwight...Maybe I'll give this one a try as well...I've some corks lying around...

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...