Help! Pfaff 545 H4 Presser Foot

[fibersport]

Sorry, got home late last night and didn't have time to measure, will get to it tonight for sure.

[fibersport]

Managed to take these pictures with a scale in the background, let me know if these are OK or do you want more.

[fibersport]

I have a couple more but I can't upload them right now.

[Uwe]

On 7/27/2024 at 12:49 AM, aulde said:

I ordered a few sets of feet from Kwok Hing (khsew). I received the feet, and after installing on my machine I noticed that the new feet are about 2mm shorter than the OEM foot.

Those other feet in the photo are not OEM/Pfaff feet, but rather some other aftermarket supplier. 

It’s likely the case that those other aftermarket feet are taller than they should be and that the machine was adjusted to accommodate the taller feet.

My guess is that the KH feet are the better feet in this comparison, in terms of matching the original OEM dimensions. 

 

Edited July 31, 2024 by Uwe

[fibersport]

I see my photos didn't upload, wil get them tonight.

[rattletrap1970]

I have a Pfaff 545-H4 that I put into a sewing table and outfitted with a Sew-Quiet 5000 servo drive. I damaged the presser foot and would like to get an OEM (actual Pfaff) presser and walking foot. Does anyone have any info on where I can get these? If I really have to I'd go with an Amazon solution, but would like one I know for sure will fit as I have heard of ones not fitting.

Thanks

Rich

[fibersport]

I have had good luck with this company:  https://www.amazon.com/stores/ckpsms/page/8C8B8C59-BE53-42E6-B404-8E5D05BAEFB8?ref_=ast_bln&store_ref=bl_ast_dp_brandLogo_sto

 

[aulde]

On 7/31/2024 at 5:14 AM, fibersport said:

I see my photos didn't upload, wil get them tonight.

Hey! Any luck on the photos? Thanks.

[Northmount]

On 7/31/2024 at 5:14 AM, fibersport said:

I see my photos didn't upload, wil get them tonight.

Reduce the size to 800 pixels in the longest dimension. 

[aulde]

On 7/31/2024 at 1:21 AM, Uwe said:

Those other feet in the photo are not OEM/Pfaff feet, but rather some other aftermarket supplier. 

It’s likely the case that those other aftermarket feet are taller than they should be and that the machine was adjusted to accommodate the taller feet.

My guess is that the KH feet are the better feet in this comparison, in terms of matching the original OEM dimensions. 

 

Thank you! Do you have any idea on how I can readjust the rear presser bar to accommodate the KH feet?