Sundancekid2 Report post Posted September 3 I have an Adler 105-64. I need the top v belt and can't fine what size it needs. I think I measured correct, 1/4 x 63". Hope someone can help and give me sizes and brand. Thanks Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted September 3 10 hours ago, Sundancekid2 said: I have an Adler 105-64. I need the top v belt and can't fine what size it needs. I think I measured correct, 1/4 x 63". Hope someone can help and give me sizes and brand. Thanks You can buy belts @ a hardware store,auto parts,lawnmower,etc get it 3/8" wide by the length you measured. Quote Share this post Link to post Share on other sites
Sundancekid2 Report post Posted September 3 I am not sure if the 3/8" wide belt fits the pulley on sewing machine, the pulley opening appears to measure 1/4" approximately. The handwheel pulley down to the axel pulley is 63". Both measure close to 1/4" wide. Quote Share this post Link to post Share on other sites
Wizcrafts Report post Posted September 3 Just now, Sundancekid2 said: I am not sure if the 3/8" wide belt fits the pulley on sewing machine, the pulley opening appears to measure 1/4" approximately. The handwheel pulley down to the axel pulley is 63". Both measure close to 1/4" wide. You can buy 1/4 inch diameter leather belting and a steel C clip and cut it to size. Order a 64 inch length and you should be golden. You'll need a tiny hole punch, like for poking a hole for a hand stitching needle. Most revolving punches have this size in them. Quote Share this post Link to post Share on other sites
shoepatcher Report post Posted September 3 105-64 should use a 3L v belt. Send pic of pulley. glenn Quote Share this post Link to post Share on other sites
Sundancekid2 Report post Posted September 3 Will do, when I get to the shop! Thanks Quote Share this post Link to post Share on other sites
Sundancekid2 Report post Posted September 3 It will not allow me to post. Says the file is to big. Sorry. Quote Share this post Link to post Share on other sites
Northmount Report post Posted September 4 18 hours ago, Sundancekid2 said: It will not allow me to post. Says the file is to big. Sorry. If your files are too large to post here due to file size restrictions, you need to resize your files to fit. Follow this link for some helps and suggestions. https://leatherworker.net/forum/topic/15122-how-to-post-pictures-on-lw/?do=findComment&comment=551171 There are lots of Apps, software, and online tools available on the web, or even built into your device to enable you to reduce your file sizes. 800 pixels in the longest dimension is quite adequate. Smart phone screens and many monitors don't display high res files in high resolution. People that live on the fringes of the internet appreciate smaller file sizes and high res photos may take from 10 minutes to hours to download. Quote Share this post Link to post Share on other sites
Sundancekid2 Report post Posted September 5 Thanks! Quote Share this post Link to post Share on other sites
