Patrick1 Report post Posted October 18 Well if it's any comfort, the shipping rate to Australia is cheaper than me sending something to Canada. I don't know what the rates are for the table yet but it weighs 2 lbs. or .907 kilos. @Wizcrafts would need more detail on the Adler 30-7 patcher. Like pictures of what the current plate is off the machine. One other thing on using aluminum, all the ones I ship will have an epoxy clear coat. Will probably offer some in Cerakote but that will cost more. The Cerakote is awesome, better than anodize in my opinion. Redid all my rifles in Cerakote, doesn't scratch as easily. Table works with the stock plate and feed dog also. Quote Share this post Link to post Share on other sites
DieselTech Report post Posted October 18 6 hours ago, Patrick1 said: Well if it's any comfort, the shipping rate to Australia is cheaper than me sending something to Canada. I don't know what the rates are for the table yet but it weighs 2 lbs. or .907 kilos. @Wizcrafts would need more detail on the Adler 30-7 patcher. Like pictures of what the current plate is off the machine. One other thing on using aluminum, all the ones I ship will have an epoxy clear coat. Will probably offer some in Cerakote but that will cost more. The Cerakote is awesome, better than anodize in my opinion. Redid all my rifles in Cerakote, doesn't scratch as easily. Table works with the stock plate and feed dog also. I will 2nd the Cerakote. Tuff sh@@!! wears like steel if applied right. I use it on firearms. Dang even more intrigued on purchasing a table top. Quote Share this post Link to post Share on other sites
dikman Report post Posted October 18 That's bizarre, Patrick, as Canada is your next-door neighbour!! Brian, thanks, it never occurred to me to check where I bought the machine from. Looks like it should do the job and at $98 shipped it's not worth stuffing around. Quote Share this post Link to post Share on other sites
kgg Report post Posted October 19 12 hours ago, dikman said: That's bizarre, Patrick, as Canada is your next-door neighbour!! Nah, once stuff hits that magic line the shipping goes to hell, duty, taxes, brokerage fees and whatever else they can think of. A lot of us that live close to border have a US address and drive across to pick items up that way we only usually have to pay at most the taxes. Example: If I was to buy a new Consew 206RB-5. Option 1: Buy from a US vendor at retail for about $1500 US and ship to my US address the cost would be $1500 plus say $250 USD or about $2400 CAD then add $312 in Taxes to drive it across the border for a total of about $2700 CAD. Option 2: Have the Ontario Consew distributor bring one in and the price goes to $3600 CAD (tax in) plus either drive 4 hours each way or pay another $300 for shipping for a total of $3900 CAD. Hum which option??? kgg Quote Share this post Link to post Share on other sites
toxo Report post Posted October 19 This is the table top I ordered with my LS 341. It's 48cm long and 39cm wide and 25.3cm from the front to the start of the cutout. The perspex is 8mm and the metal bit is 3mm. The two thumbscrews do a good job of holding it in place and there's a hole at the right hand side of the machine which is handy to drop in any old screw to help keep it in place although I have to say, before I put the screw in the T/T only moved a maximum of around 2mm. I like it very much. It's quite robust enough and although I've leant on a couple of times I wouldn't like to stand on it. Quote Share this post Link to post Share on other sites
kgg Report post Posted October 20 My brief summary so far: 1) So far there are number of very nice table tops commercially available. 2) The main drawback from what I see for my needs is i) their inability to handle any of the attachments that are readily available and less expensive for the flatbed machines and ii) most require the use of a drop down edge guide, which I don't like using. 3) Most like the larger size table tops. kgg Quote Share this post Link to post Share on other sites
Patrick1 Report post Posted October 21 Here's a larger table. 14.75 X 8.00 X .375 thick with about 8.875 from the edge of the table to the needle. Still solid as a rock. Looking at offering both tables in Storm Trooper white Cerakote. $125.00, coated. Doesn't break the bank for most folks. Quote Share this post Link to post Share on other sites
DieselTech Report post Posted October 21 2 minutes ago, Patrick1 said: Here's a larger table. 14.75 X 8.00 X .375 thick with about 8.875 from the edge of the table to the needle. Still solid as a rock. Looking at offering both tables in Storm Trooper white Cerakote. $125.00, coated. Doesn't break the bank for most folks. Nice! Save me a white one! Lmao I have spent too much money lately & strapped for cash. So it will be a few months before I recoup. Thanks. Nice work/fabrication! Quote Share this post Link to post Share on other sites
AlZilla Report post Posted October 21 @Patrick1, good thinking, extending it to the left. I have one that extends to the pillar - definitely see the increased versatility with this design. Quote Share this post Link to post Share on other sites
RockyAussie Report post Posted October 22 11 hours ago, Patrick1 said: Here's a larger table. 14.75 X 8.00 X .375 thick with about 8.875 from the edge of the table to the needle. Still solid as a rock. Looking at offering both tables in Storm Trooper white Cerakote. $125.00, coated. Doesn't break the bank for most folks Nice looking job there Patrick. Quote Share this post Link to post Share on other sites
sportycliff Report post Posted October 25 On 10/21/2024 at 11:22 AM, Patrick1 said: Here's a larger table. 14.75 X 8.00 X .375 thick with about 8.875 from the edge of the table to the needle. Still solid as a rock. Looking at offering both tables in Storm Trooper white Cerakote. $125.00, coated. Doesn't break the bank for most folks. Can't wait until this is available!! I'm in! Quote Share this post Link to post Share on other sites
Patrick1 Report post Posted October 27 Will have the same tables available for the Durkopp Adler 205-370 as shown here. Sure is a beautiful machine. Quote Share this post Link to post Share on other sites
Constabulary Report post Posted October 27 (edited) Different machine but basically the same thing. Some years ago I made a flat bed attachment for my Singer 45D91 from a IKEA bamboo cutting board. Super low cost (less than 20€ / $22) very sturdy and it has IMO it has a nice look. To be fair the cutting board idea back then came from LW member UWE. He made them way more professional than I but I was able to make it with the tools I have. https://leatherworker.net/forum/topic/72789-singer-45d91-restoration/?tab=comments#comment-552472 https://www.ikea.com/us/en/p/aptitlig-cutting-board-bamboo-80233430/ This is what UWE did https://leatherworker.net/forum/topic/65589-flatbed-table-attachment-for-pfaff-335/ I also made one from screen printing plate for my Singer 108w20 but to be honest I have never used it. That one was cheap also... Edited October 27 by Constabulary Quote Share this post Link to post Share on other sites
Constabulary Report post Posted October 27 BTW - I cut some threads for attaching some edge guides and I also have an oil hole in it. Quote Share this post Link to post Share on other sites
shoepatcher Report post Posted October 27 Very Nice C!! glenn Quote Share this post Link to post Share on other sites
1hp Report post Posted November 3 made one out of 304 stainless. recommend buying one from Patrick1. this was a total PITA. Quote Share this post Link to post Share on other sites
1hp Report post Posted November 3 (edited) the underside. had to mill the standoffs to get the right height & levelness. Edited November 3 by 1hp more info Quote Share this post Link to post Share on other sites
AlZilla Report post Posted November 3 I have an aluminum table and live in a colder climate. That metal table can be pretty uncomfortable. Quote Share this post Link to post Share on other sites
Patrick1 Report post Posted November 3 @1hp You did real a nice job. The flat plate has a nice blend to it. Quote Share this post Link to post Share on other sites
