Members steelhawk Posted January 21 Members Report Posted January 21 (edited) My machine was sewing just fine. I checked the bobbin and it was nearly empty. I didn't have a spare, so I put it on the bobbin winder. I did something while trying to bump the speed up so it would get done sooner. Now the machine goes in reverse. I don't know what I did or how to undo it. Attached is a pic of the motor I have. Edited January 21 by steelhawk Quote
Members chisel Posted January 21 Members Report Posted January 21 CS1000 MOTOR_INST.pdf See section 2. Quote
Members DieselTech Posted January 21 Members Report Posted January 21 Look on the back of the control unit for a reverse polarity switch. Or the motor. I think some had it. Quote
toxo Posted January 21 Report Posted January 21 On some machines its on the front panel. On mine I think it's F1 and F2. Quote
Members steelhawk Posted January 21 Author Members Report Posted January 21 1 hour ago, chisel said: CS1000 MOTOR_INST.pdf See section 2. Section 2 looks like what I accidentally did. I will fix it tomorrow. Thanks. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.