Jump to content

Recommended Posts

  • Members
Posted

So I got off the phone today with a customer that I made a scout style knife sheath for one of his knives. He wanted a sheath the formed as much as possible to his particular knife.

I explained to him that it wasn't possible for me to match a knife exactly when I don't have the knife in hand but I could get close because I can get the details from the website. He agreed and I worked on the sheath. 

He called and said that it was really snug but couldn't get the blade to go in all the way, other than that he loved the sheath. I asked him how much more does he need it to go in. He wanted it to go in another 1/8". I explained that if he leaves the knife in for a day the leather will form better to the knife. He said that if it didn't from better he guessed he could live with it.

:dunno:

So what are some of yalls nit picky client complaints?

logo3.jpg.51e289ae6f75a852399bfa88b35daaa3.jpg

  • Members
Posted

That's an issue we all come across , not having the item ,like the knife ,to make a custom sheath or case. The same issue I have atm for an order for a holster for a vintage revolver, a paper tracing of the revolver on a scrap piece of news paper just doesn't cut it, I need the revolver, but the gun laws here in Oz,  say I can't have it . HS 

' I have a very gweat friend in Wome called Biggus Dickus,

He has a wife you know, do you know whats she's called? Incontinentia.......Incontinentia Buttocks '  :rofl:

Posted

I always err on the side of the customer.  I have made new replacement holsters and sent them, telling them to keep the old one as a souvenir.  I may not make a profit, but at least break even.  The cost of goodwill is worth that to me.  They say customers who are thrilled will tell about 6 folks about their experience.  Those that are dissatisfied tell many more.  Any more customer service sucks with almost every company you deal with.  I want to remind folks what it used to be like when someone stands behind their product without the consumer having to buy an extra warranty or "insurance". 

In God's Grace,

Pastor Bob

"While we were yet sinners, Christ died for us." - Romans 5:8

www.PastorBobLeather.com

YouTube Channel

  • Contributing Member
Posted
4 hours ago, Handstitched said:

That's an issue we all come across , not having the item ,like the knife ,to make a custom sheath or case. The same issue I have atm for an order for a holster for a vintage revolver, a paper tracing of the revolver on a scrap piece of news paper just doesn't cut it, I need the revolver, but the gun laws here in Oz,  say I can't have it . HS 

Could you not have the customer bring the gun to you and then make a pattern from it whilst he/she is there?

Al speling misteaks aer all mi own werk..

  • Members
Posted
5 hours ago, PastorBob said:

I always err on the side of the customer.  I have made new replacement holsters and sent them, telling them to keep the old one as a souvenir.  I may not make a profit, but at least break even.  The cost of goodwill is worth that to me.  They say customers who are thrilled will tell about 6 folks about their experience.  Those that are dissatisfied tell many more.  Any more customer service sucks with almost every company you deal with.  I want to remind folks what it used to be like when someone stands behind their product without the consumer having to buy an extra warranty or "insurance". 

I agree completely. I told the customer that if he doesnt like it I'll make it right. So I'll let him think about it a few days then reach out to make sure he's satisfied.

logo3.jpg.51e289ae6f75a852399bfa88b35daaa3.jpg

  • Members
Posted
6 hours ago, fredk said:

Could you not have the customer bring the gun to you and then make a pattern from it whilst he/she is there?

Technically, here in Oz we are only allowed to transport handguns to and from the range (or a gunsmith/dealer, who will be suitably licensed to accept it and have the necessary paperwork). Having said that it varies from State to State, here in SA it is possible BUT there is paperwork involved and the receiving person should have a handgun licence. Plus Handstitched is in Western Australia where their Firearms Regulations are in complete disarray due to politics! Firearm owners there have to be very, very careful at the moment.

Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500.

Chinese shoe patcher; Singer 201K (old hand crank)

  • Members
Posted
7 hours ago, PastorBob said:

I always err on the side of the customer.  I have made new replacement holsters and sent them, telling them to keep the old one as a souvenir.  I may not make a profit, but at least break even.  The cost of goodwill is worth that to me.  They say customers who are thrilled will tell about 6 folks about their experience.  Those that are dissatisfied tell many more.  Any more customer service sucks with almost every company you deal with.  I want to remind folks what it used to be like when someone stands behind their product without the consumer having to buy an extra warranty or "insurance". 

👍

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...