Sunstar Sewing Machine 380BL

[Redhorse64]

Sunstar 380BL, could anyone help me with threading this machine, its used of course, and the manual is not clear on proper threading.

Thanks! 

Edited Sunday at 01:33 AM by Northmount
Split off an old thread and fixed title to represent the topic

[Northmount]

11 hours ago, Redhorse64 said:

Sunstar 380BL, could anyone help me with threading this machine, its used of course, and the manual is not clear on proper threading.

Thanks! 

Instead of tagging onto old threads, and especially threads that don't list the same model number is not a great idea.  I split your post off to a new thread.  Also found a manual https://www.manualslib.com/manual/970676/Sunstar-Km-380bl.html 

Refer to page 13.

 

[Redhorse64]

On 8/9/2025 at 7:50 PM, Northmount said:

Instead of tagging onto old threads, and especially threads that don't list the same model number is not a great idea.  I split your post off to a new thread.  Also found a manual https://www.manualslib.com/manual/970676/Sunstar-Km-380bl.html 

Refer to page 13.

WOW, thanks for your help, as I said, the manual is unclear, and then you post the same manual I have.  I wasn't looking for a lesson from you about how to post, I was looking for help.  Ill take my comment down and try somewhere else. Have a nice day.

Edited 2 hours ago by Northmount
Removed comment from quote box and placed in proper location

[Northmount]

20 minutes ago, Redhorse64 said:

WOW, thanks for your help, as I said, the manual is unclear, and then you post the same manual I have.  I wasn't looking for a lesson from you about how to post, I was looking for help.  Ill take my comment down and try somewhere else. Have a nice day.

Since I had no knowledge of what instruction manual you had, I offered you what I found.  If you don't like it, that is your problem, not mine.  I'm not a sewing machine specialist and was trying to give you a leg up until someone else could come along with more help than I can provide.

Members of this site need to follow some fairly standard practices and etiquette that are common across many user forums.  If you want the support and help from members of any forum, you need to get people on your side, not blow off steam and post in threads that don't apply directly to your machine.  

If you want to leave, that is just fine.  However, you can not delete posts, nor can you edit posts after the edit window time has closed.

As you replied to me, I assume sarcastically, I truly hope you have a better day today.  I expected better from one Albertan to another, but so be it.

[Northmount]

@Redhorse64

Being a moderator on this site is all volunteer work, no pay, just the satisfaction of being able to help others.  Too much crap really shifts how we feel about continuing to support and help others.

[Johanna]

@Northmount You have unselfishly helped lots of people over the years. If I could figure out how to put a gold crown over your name, I would.

[kgg]

29 minutes ago, Northmount said:

Being a moderator on this site is all volunteer work, no pay, just the satisfaction of being able to help others.  Too much crap really shifts how we feel about continuing to support and help others.

I'm not a moderator just your average joe user and probably a pain in the butt at times. I wholeheartedly appreciate the work and effort that all the moderators do to help keep the rest of us on track and this forum running. 

1 hour ago, Redhorse64 said:

WOW, thanks for your help, as I said, the manual is unclear, and then you post the same manual I have.  I wasn't looking for a lesson from you about how to post, I was looking for help.  Ill take my comment down and try somewhere else.

You really need to rethink what you said and your tone. It really doesn't do you any favours and may come back to haunt you in the future should you decide to stay when you do need help.

Have a nice day.

kgg

[Northmount]

7 minutes ago, Johanna said:

@Northmount You have unselfishly helped lots of people over the years. If I could figure out how to put a gold crown over your name, I would.

Thanks Johanna, it is appreciated.

[Northmount]

3 minutes ago, kgg said:

I'm not a moderator just your average joe user and probably a pain in the butt at times. I wholeheartedly appreciate the work and effort that all the moderators do to help keep the rest of us on track and this forum running. 

Appreciate your comments and the help you provide to many here.