New Bowie Sheath

[DCKNIVES]

Just did a collaboration on a knife/sheath project for a customer.For a change I didn't make the entire sheath, just the veg-tan core and the concho.My buddy Josh Dabney another maker did the rawhide wrap and all the danglies and did a great job. For the knife we designed it and I ground it and Josh did the HT and I finished up the assembly.Dave

The knife is 16 1/2" oa and has an 11" blade made from a Alabama Damascus billet.The deer crown is from the customer.The concho was made from another deer crown and a piece of damascus I machined and was made to match the knife.

[Luke Hatley]

Great Looking outfit..........Is this for a Buckskinner? if is is...

He will shine on the Green.........

[MADMAX22]

Great looking knife and sheath, you and your Buddie did a outstanding job with it.

[CliffFendley]

Dave, that is very nice. You both did a terrific job.

[Jim]

By golly, that one's got STYYYYYYLE! Hey, that knife wouldn't happen to be a Lone Wolf, would it?

[DCKNIVES]

Thanks everyone, and no, not a Lonewolf, that was made by me.Dave

[hidepounder]

Pretty fancy Dave! You guys put in a lot of work on both pieces and it shows!

Bobby

[Jim]

Thanks everyone, and no, not a Lonewolf, that was made by me.Dave

I have some of Lone Wolf's knives and by the looks of it, he's got some major competition. Nice job!

[Vikefan]

Just did a collaboration on a knife/sheath project for a customer.For a change I didn't make the entire sheath, just the veg-tan core and the concho.My buddy Josh Dabney another maker did the rawhide wrap and all the danglies and did a great job. For the knife we designed it and I ground it and Josh did the HT and I finished up the assembly.Dave

The knife is 16 1/2" oa and has an 11" blade made from a Alabama Damascus billet.The deer crown is from the customer.The concho was made from another deer crown and a piece of damascus I machined and was made to match the knife.

I for one absolutely "love" it. Great design and everything "fits".