Members DCKNIVES Posted November 29, 2009 Members Report Posted November 29, 2009 Just did a collaboration on a knife/sheath project for a customer.For a change I didn't make the entire sheath, just the veg-tan core and the concho.My buddy Josh Dabney another maker did the rawhide wrap and all the danglies and did a great job. For the knife we designed it and I ground it and Josh did the HT and I finished up the assembly.Dave The knife is 16 1/2" oa and has an 11" blade made from a Alabama Damascus billet.The deer crown is from the customer.The concho was made from another deer crown and a piece of damascus I machined and was made to match the knife. Quote
Ambassador Luke Hatley Posted November 29, 2009 Ambassador Report Posted November 29, 2009 Great Looking outfit..........Is this for a Buckskinner? if is is... He will shine on the Green......... Quote
MADMAX22 Posted November 30, 2009 Report Posted November 30, 2009 Great looking knife and sheath, you and your Buddie did a outstanding job with it. Quote
Members CliffFendley Posted December 2, 2009 Members Report Posted December 2, 2009 Dave, that is very nice. You both did a terrific job. Quote
Members Jim Posted December 3, 2009 Members Report Posted December 3, 2009 By golly, that one's got STYYYYYYLE! Hey, that knife wouldn't happen to be a Lone Wolf, would it? Quote
Members DCKNIVES Posted December 3, 2009 Author Members Report Posted December 3, 2009 Thanks everyone, and no, not a Lonewolf, that was made by me.Dave Quote
hidepounder Posted December 3, 2009 Report Posted December 3, 2009 Pretty fancy Dave! You guys put in a lot of work on both pieces and it shows! Bobby Quote
Members Jim Posted December 4, 2009 Members Report Posted December 4, 2009 Thanks everyone, and no, not a Lonewolf, that was made by me.Dave I have some of Lone Wolf's knives and by the looks of it, he's got some major competition. Nice job! Quote
Members Vikefan Posted December 13, 2009 Members Report Posted December 13, 2009 Just did a collaboration on a knife/sheath project for a customer.For a change I didn't make the entire sheath, just the veg-tan core and the concho.My buddy Josh Dabney another maker did the rawhide wrap and all the danglies and did a great job. For the knife we designed it and I ground it and Josh did the HT and I finished up the assembly.Dave The knife is 16 1/2" oa and has an 11" blade made from a Alabama Damascus billet.The deer crown is from the customer.The concho was made from another deer crown and a piece of damascus I machined and was made to match the knife. I for one absolutely "love" it. Great design and everything "fits". Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.