BearMan Report post Posted August 13, 2010 Hi Everybody, Here is what I've been working on lately. I have a little over 100 hours in it. I made everything in it, except for some of the stamping tools, the 2 swivel knives & blades, & the 6" rule. At last count, there are 35 tools in all. The tools include: a 4" slicker, a border tool, 6" rule, small screwdriver, "cheat sheets", 18 stamping tools, a strop, an expandable tube of rouge, a pair of "Lady Leg" dividers (carbon fiber), 2 different swivel knives, 2 extra blades, a petal lifter, a modeling tool, an allen wrench, & a 20oz Rosewood Maul. Several things are held in place by rare earth magnets. The compartment lid uses a magnetic latch. The top leather piece is held on with 93 tiny nails,,, I don't think it will fall off,,, hehehe The finger carved bird, is my interpretation of Clay Millers design. I only have one "secret" compartment in this box,,, & of course no I can't tell you where!! I was told I should call it "30-05" (thirty ought five), because it's 30 lbs of stuff,,, in a 5 lb box. Thanks Ben! Sooo,,,, what do you think??? What did I forget to put in,,, in this 9 1/2" x 6" x 2 1/2" box? Thanks for looking,,, Ed the"BearMan" Quote Share this post Link to post Share on other sites
CitizenKate Report post Posted August 13, 2010 Holy schnikes!!! Kate Quote Share this post Link to post Share on other sites
Casey Jordan Report post Posted August 13, 2010 AWESOME ! Quote Share this post Link to post Share on other sites
Fredo Report post Posted August 13, 2010 I'll add WOW!!! Quote Share this post Link to post Share on other sites
wvcraftsman Report post Posted August 13, 2010 Not only do I admire your leatherworking abilities, but also your woodworking abilities. That is incredible!!!! Quote Share this post Link to post Share on other sites
RonaldSe Report post Posted August 13, 2010 WOW!!!! BEAUTIFUL LEATHER AND WOODWORK!!! Quote Share this post Link to post Share on other sites
Grunt Report post Posted August 13, 2010 YOWSA!!!!!! That is an incredible piece of craftsmanship! Quote Share this post Link to post Share on other sites
abn Report post Posted August 13, 2010 Well, that sure beats the 20" plastic toolbox I use... Ed, will you adopt me? Quote Share this post Link to post Share on other sites
BearMan Report post Posted August 13, 2010 Thanks everybody! It's going to be a Christmas present,,, I'm glad I started it early! Now only about a dozen more presents to make,,, Ed Quote Share this post Link to post Share on other sites
LuisPaulo Report post Posted August 13, 2010 TRUUUULY amazing Quote Share this post Link to post Share on other sites
Spinner Report post Posted August 13, 2010 That is awesome Ed. Great Leather, Wood AND Metal work. First question is, do you offer that modeling tool for sale, at least the spoon section - with or without handle...? Quote Share this post Link to post Share on other sites
roo4u Report post Posted August 14, 2010 wow, ive been thinking about learning to do a little leather carving so let me just say....IM AVAILABLE FOR ADOPTION! just kidding im too old for that but that set is a beauty to behold Quote Share this post Link to post Share on other sites
KB8UVM Report post Posted August 14, 2010 Can I be your son? Quote Share this post Link to post Share on other sites
BearMan Report post Posted August 14, 2010 Thanks soooo much! It's nice to make something that so many people like! I truly believe that with some time & patience,,, most anybody can do this. I have a little over 100 hours in it. That's including the 4 times I did the bear claw, before I was happy with it. Of course those 100 hours are spread out over about a month & half,,, with a lot of "dream designing" in the middle of the night, when I should be sleeping. Thanks again for all the wonderful compliments,,, I'm really happy that it's done!! hehehe Quote Share this post Link to post Share on other sites
Daniel Tyack Report post Posted August 14, 2010 It's funny how beautiful leather work like you have on top is such a minute detail in the scope of a project like this. I think be may need to start a "Super Show Off" section just for this post! As a certified son I am also available for adoption... Simply amazing work. Quote Share this post Link to post Share on other sites
King's X Report post Posted August 14, 2010 Speechless!! Quote Share this post Link to post Share on other sites
Crystal Report post Posted August 14, 2010 I don't want adopted... I want you to come organize my work space!! Very beautiful and exceptionally organized and planned. Crystal Quote Share this post Link to post Share on other sites
leatheroo Report post Posted August 14, 2010 What a joy it would be to own and use that beautiful toolbox. Quote Share this post Link to post Share on other sites
BearMan Report post Posted August 14, 2010 My Goodness!! I deffinately need a bigger house with all the new adoptees!! Not to mention, trying to keep everybody out of my shop!! hehehe Thanks Everybody!! Quote Share this post Link to post Share on other sites
Vinkimus Report post Posted August 15, 2010 (edited) :jawdropper:That is neeeeeeeet!Amazing work...Your son is one lucky man! Edited August 15, 2010 by Vinkimus Quote Share this post Link to post Share on other sites
JohnBarton Report post Posted August 15, 2010 Hi Everybody, Here is what I've been working on lately. I have a little over 100 hours in it. I made everything in it, except for some of the stamping tools, the 2 swivel knives & blades, & the 6" rule. At last count, there are 35 tools in all. The tools include: a 4" slicker, a border tool, 6" rule, small screwdriver, "cheat sheets", 18 stamping tools, a strop, an expandable tube of rouge, a pair of "Lady Leg" dividers (carbon fiber), 2 different swivel knives, 2 extra blades, a petal lifter, a modeling tool, an allen wrench, & a 20oz Rosewood Maul. Several things are held in place by rare earth magnets. The compartment lid uses a magnetic latch. The top leather piece is held on with 93 tiny nails,,, I don't think it will fall off,,, hehehe The finger carved bird, is my interpretation of Clay Millers design. I only have one "secret" compartment in this box,,, & of course no I can't tell you where!! I was told I should call it "30-05" (thirty ought five), because it's 30 lbs of stuff,,, in a 5 lb box. Thanks Ben! Sooo,,,, what do you think??? What did I forget to put in,,, in this 9 1/2" x 6" x 2 1/2" box? Thanks for looking,,, Ed the"BearMan" Somehow I just imagined a commercial where the camera pans into a large country house. A woman is sobbing in the background and on the phone. A soothing voice assures her that it will be alright. The next scene shows a man tending to his horses, getting them all settled in with care and then he grabs a box that we only get a glimpse of and gets into his immaculately restored classic Ford truck. Winding country roads later the truck pulls up to the large house and the man gets out and goes in. The distraught lady thanks him for coming to her aid in this emergency. He asks to see the patient. The camera pans across an expansive mahogany table with ornate chairs. Comes up on the main chair with it's intricately carved leather inlay and it's got a large tear and stain right in the center, where a man's heart would be. "Can you repair this?" pleads the woman. The leather master now sets his ornate tool box on the table and the camera slowly caresses it while moving towards the latches. The box is opened and the last words spoken are a soft and confident, "I can". The camera fades out to and elegantly carved logo that reads "Bearman Leather" --------------------------------------------------------------------------------------------------------------------------------------- This setup is so amazing that it has now replaced my daughter as my desktop wallpaper. As a case guy I am humbly bowing to you for this incredibly functional and beautiful work of art. Masters like you give hacks like me mountains to climb. Thank you! Quote Share this post Link to post Share on other sites
BearMan Report post Posted August 16, 2010 Thank You so much John,,,, What a story!! But,,, you are NOT a "Hack",,, in any way! The cases you make are some of the best I've seen. Thanks to everybody for all the very kind compliments!! Ed the"BearMan" Quote Share this post Link to post Share on other sites
Clay Report post Posted August 16, 2010 Ed, That is a stunning display of craftmanship. The bird is way cool too! ClayM. Quote Share this post Link to post Share on other sites
BearMan Report post Posted August 16, 2010 Good Morning Clay, I wonder where you've seen it before??? I really liked your Bird design the best,,,, so,, I hope my interpretation is ok. Your work makes me work harder to do better all the time,,, Thanks,,, Ed Quote Share this post Link to post Share on other sites
Meleck Report post Posted August 17, 2010 It's THE sickest tool box I've ever seen. It's GEORGEOUS. I do have a question, what is the glass plate on the left of the first and last pictures? Is that the 4" slicker? Quote Share this post Link to post Share on other sites
