Ambassador Luke Hatley Posted February 8, 2011 Ambassador Report Posted February 8, 2011 That is awsum thank you for doing it. did you keep up with the amount of time it took to make one Bottell.? Quote
Leather Bum Posted February 8, 2011 Report Posted February 8, 2011 (edited) No problem, guys. I actually have not made one of these yet, so I'm not sure how long it takes. . .? Edited February 8, 2011 by Leather Bum Quote
Members MMArmoury Posted February 8, 2011 Members Report Posted February 8, 2011 I've had great success making and selling these. I sold a dozen last year and I just sold another eight. I think I am getting pretty good at it. Quote
Members MikeCahill Posted March 6, 2011 Members Report Posted March 6, 2011 A BEAUTIFUL flask, I used to make weed pot similar to this, and a friend used to macrame (knotting string) ropes for them, The method I used was different, I carved half of the bottle shape out of wood, and mounted it on a stout board, I also cut out a piece of ply the same outline as the wooden forme, but 3mm clear all round, I then would staple a piece of soaking wet leather to it, and clamped the leather over the former, after a couple of days in the press, the shape was fixed, I would glue both halves together and hand stitch, I don't think I managed to make one as nice as yours though! Quote
Members Hell Bent 4 Leather Posted December 30, 2011 Members Report Posted December 30, 2011 This is awesome! I can't wait to try it! I think I will use cheese makers wax to coat it with, though, it stays flexible and doesn't crack. Quote
Members Big Steve Posted April 6, 2012 Members Report Posted April 6, 2012 Mike, how do i get to the pictures on the constuction where have they been moved to.. Regards, Big Steve. Quote
Members jacket potato Posted July 7, 2013 Members Report Posted July 7, 2013 Hi, I know this is an old thread but I thought I will ask anyway. I am planning to try making one of these bottles for myself, however, one of my friends asked me if it is safe to actually drink from this bottle? How is it in terms of hygiene? Bacteria and stuff? Food safety is a big issue so if somebody could tell me please if such a bottle would be safe to use for drinking I would appreciate it please. Thank you! Era Quote
Members Techmiller Posted January 18, 2014 Members Report Posted January 18, 2014 Well both beeswax and pine pitch are food safe. Cleaning and or sterilization might be difficult if you put anything more than water in it. I personal have not made one yet but am working on one now. Quote
Members KCF2013 Posted January 24, 2014 Members Report Posted January 24, 2014 Great thread, awesome bottles, will be making one this weekend I d obelieve...I wonder if using Canuba wax and bees wax mix would do? Both food safe and flex/tacky enough? I dunno me, anyone have thoughts on sealer? Quote
Members Brushpopper Posted February 6, 2015 Members Report Posted February 6, 2015 (edited) I've posted this on 'Show Off'. Hope it's okay to repeat it here. It's a flacket from the Mary Rose made with wooden formers. It's flatter on the back to lie comfortably against the body. Edited February 6, 2015 by Brushpopper Quote
Members Stewart18 Posted July 7, 2016 Members Report Posted July 7, 2016 What happened to the pictures Quote
Northmount Posted July 7, 2016 Report Posted July 7, 2016 59 minutes ago, Stewart18 said: What happened to the pictures Looks like the OP moved them or changed access permissions. Looks like they were posted on a photo sharing site instead of on this site. Tom Quote
Members DV8DUG Posted February 13, 2018 Members Report Posted February 13, 2018 Bring back the photos please... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.