Members jwwright Posted February 16, 2012 Members Report Posted February 16, 2012 I don't recall seeing very many seat rigged saddles posted here over the years, so I though I'd post this one I recently finished. This rough out I built on a tree with what I call Bluestem Will James swell shape. The cantle is 3" , and the duckbill horn is 2 1/2" high with a 3 1/2" cap. Thank You, JW Quote
Moderator bruce johnson Posted February 16, 2012 Moderator Report Posted February 16, 2012 There is "punchy" and then there is "PUNCHY". Then there's a level just above that reserved for stuff like this. This saddle is PUNCHY!!!! Quote
Members jwwright Posted February 17, 2012 Author Members Report Posted February 17, 2012 Yes sir, we do punchy. I'll take that as a compliment....Thank You both! JW Quote
Members CWR Posted February 17, 2012 Members Report Posted February 17, 2012 That's a fine looking rig JW. It'd make Bob Marrs proud. Thanks for showing it. CW Quote
Members BondoBobCustomSaddles Posted February 17, 2012 Members Report Posted February 17, 2012 Jim your saddles always project a usin' attitude. This saddle is no exception. Nicely done! Bob Quote
Members Billy H Posted February 17, 2012 Members Report Posted February 17, 2012 Hey JW! Cool !!!!!!! First question: Was that rig challenging to build? Second question: Do you get to try your work out--or is this one headed for sagebrush and the prairie. As always--look forward to a post from the Mad Cow. Billy Quote
Members GrampaJoel Posted February 17, 2012 Members Report Posted February 17, 2012 As always JW you make a very nice saddle. There's not much to not like about a rough out saddle. You got some style boy! Ok, I'll be the first to ask,,, I could guess, and assume, and I could pretend I know, but I'd rather know for sure. What the heck does 'punchy' mean?? Joel Quote
Moderator bruce johnson Posted February 17, 2012 Moderator Report Posted February 17, 2012 As always JW you make a very nice saddle. There's not much to not like about a rough out saddle. You got some style boy! Ok, I'll be the first to ask,,, I could guess, and assume, and I could pretend I know, but I'd rather know for sure. What the heck does 'punchy' mean?? Joel Joel, In my vernacular it means "cowboy cool". Kind of derivation of cowpuncher that has taken on a meaning if its own. Most of the time I hear it from the KS. OK, and west TX area. I had a guy email about some spur straps a few days ago, The email was "pull through leathers, barbwire and brown iron buckles, and stamp them kind of punchy" . I did a Bible cover last fall and asked what pattern she wanted on it. She said " no flowers, but punch it up some. It's for my husband". Quote
Members B Milla Posted February 17, 2012 Members Report Posted February 17, 2012 Punchy is a state of mind that many attempt, and few fully achieve. JW, is that the Lewis Tree you ordered this fall? Quote
Members jwwright Posted February 17, 2012 Author Members Report Posted February 17, 2012 Thanks to all for punchy praise. PUNCHY is as PUNCHY does. CWR......that's high praise, Thank You. JW Billy, the seat rigs are a little different to build. Took a little more time than usual, mainly because of the fact that most of what I make are plate rigs, so it was different. Kinda like the first few skirt rigs I built.....after the first couple they went as quick as a plate rig or D rig. No sir I won't ride it.... this one is on it's way to the customer who ordered it. Thank You, JW B Milla......This is on a Sonny Felkins tree, as most of mine are. The Lewis tree I built on last Fall, and has been delivered to the customer for a couple of months now. I'll see if I can attach a photo of it here on this reply. Thank You, JW Quote
Members B Milla Posted February 17, 2012 Members Report Posted February 17, 2012 10-4 JW, they both look good, i think i like the Will James more each time i see one. Bruce is point-on with the punchy comment. Its about the punchiest. Quote
Members jwwright Posted February 17, 2012 Author Members Report Posted February 17, 2012 B Milla..........Thank You, sir. I really liked that Lewis tree, and especially that swell shape. Wish I could get it 14" wide as well. I d intend too use more . Thanks, JW Quote
Steve Brewer Posted February 18, 2012 Report Posted February 18, 2012 Looks like anther good one JW. Quote
Members jwwright Posted February 18, 2012 Author Members Report Posted February 18, 2012 Thank You, Steve. JW Quote
Members Billy H Posted February 18, 2012 Members Report Posted February 18, 2012 Well I kinda figured it was headed for some dust. I was hoping that you where going to ride it some so I could ask what a seat rig is like to ride.I have only seen pictures of them. Are you all getting any moisture for your fields this year? regards Billy Quote
Members GrampaJoel Posted February 18, 2012 Members Report Posted February 18, 2012 Bruce Thanks for adding to the education and vocabulary of this ol' SOCAL boy. So JW, from my new vocab I say, yep that is one PUNCHY saddle! I was wondering, what is the thigh 'pinch factor' to a saddle rigged like that? Joel Quote
Members jwwright Posted February 18, 2012 Author Members Report Posted February 18, 2012 Billy........I've had a seat rig before, and I couldn't tell much difference between it and a plate rig, and at least the way I build them, there is the same amount of leather under your leg either way. We've had a couple nice rains this winter, b ut we are certainly not out of the drought yet.......hoping for the best come spring time. Thank You. JW Joel........they don't pinch. Thank You, JW Quote
Members Billy H Posted February 19, 2012 Members Report Posted February 19, 2012 Thanks JW--------- I figure questions sometimes take away the assumption factor. Hope you have a good Spring. Billy Quote
Members B Milla Posted February 21, 2012 Members Report Posted February 21, 2012 JW, you can get a 14", and for that matter a 15" too. - Bradley Quote
Members jwwright Posted February 21, 2012 Author Members Report Posted February 21, 2012 Billy.......Thank You. Bradley........yes sir, I talked with Kevin yesterday, and I'm going to get a couple 14" wide. Back when I ordered the one in the photo, it was available only 13. Thanks, JW Quote
Members Aurelie Posted February 21, 2012 Members Report Posted February 21, 2012 JW That's a FINE saddle!! Congrats! 1st time i see one of that kind!!! i am really curious about how you can blend the flate plates rigging with the seat! Would you mind to explain a bit the process (here or on MP) Not that i plan to try it soon ...but maybe , 1 day i will be "tough" enough to try... Again : that's a damn fine job!! I wish , i day i will be as good as you guys! Quote
Members jwwright Posted February 22, 2012 Author Members Report Posted February 22, 2012 Aurelie.....Thank You. The seat rig is shaped very much like a plate rigging, except that it is part of the seat jockey. The seat rigging / jockey is lined with skirting leather, as you would do with a plate rigging. The lining is from the front of the seat back to the cantle ear. It goes up and around the swells, around the back of the swells up to the handhole. The lining pieces from each side meet and over lap one another a little at the hand hole. Hope that answers your question. JW Quote
Members Aurelie Posted February 22, 2012 Members Report Posted February 22, 2012 Aurelie.....Thank You. The seat rig is shaped very much like a plate rigging, except that it is part of the seat jockey. The seat rigging / jockey is lined with skirting leather, as you would do with a plate rigging. The lining is from the front of the seat back to the cantle ear. It goes up and around the swells, around the back of the swells up to the handhole. The lining pieces from each side meet and over lap one another a little at the hand hole. Hope that answers your question. JW Thanks a lot for the explanation JW I kind of see more precisely how you build that! :-) for now, i ve got enough "new things" to try on saddles but sure i will try this one day ...and then i guess i will ask you more again : really neat job! Quote
Members Aurelie Posted February 22, 2012 Members Report Posted February 22, 2012 1 more question : what is the purpose of a "rigged seat"? I mean i know the purpose of a flate plate saddle vs a inskirt one , technically speaking but building a rigged seat is it just for "good looking"? or has it a specific technical purpose? and another question : how, who could have the idea to build something like that?? I know...it's a lot of questions..... but i like to know the hows and whys , pros and cons of everything Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.