Members DoubleC Posted May 20, 2012 Members Report Posted May 20, 2012 I learned just because you think 40 bucks is expensive doesn't make it true. Just because you expect a tool to work doesn't make it true, or expect it to come sharp. 15 minutes ago I learned just because you're a little sour on tools at the moment doesn't mean you should run amok with your new rotary cutter after opening it. Yes it's ok to laugh manically when it says use caution, very sharp. It's ok not to believe it will cut anything. HOWEVER it wasn't so much OK when I tried to cut out suede around my checkbook asleep at the wheel and found out a rotary knife will handle suede AND leather with ease. My checkbook is going to be 2 inches square if I keep making mistakes. When life hands you lemons, forget freakin lemonaid, open a cold beer and go sit and drink it in the sun with your dog. Your first dragon you carve and tool probably shouldn't be the hardest picture you could find free on the internet. When you do inlays remember NEGATIVE SPACE dummy, not just the outline, sigh. OK, anyone else? I learned a lot this week. Cheryl Quote http://www.etsy.com/shop/DoubleCCowgirl
Members sharkeyfinn Posted November 19, 2014 Members Report Posted November 19, 2014 this week i learned that buying leather and making bags for the ladies in my family for christmas was a poor choice when i have a craft show to attend next week, i now have zero leather and zero stock a good thing i learned was that you can get away with using old skiving blades in the industrial knife from tandy, i also learned that they wobble abit and will slice through the end of a thumb like hot butter Quote
Members cradom Posted November 20, 2014 Members Report Posted November 20, 2014 (edited) I learned that when making a phone case, stitch the belt loops on BEFORE you glue and stitch the sides up. Also don't use a metal headed mallet as a weight to hold the flap down while it dries. (noob here) Oh and leather shrinks so leave the form/phone in until it dries. Edited November 20, 2014 by cradom Quote
Members cgleathercraft Posted November 20, 2014 Members Report Posted November 20, 2014 I learned that a heat gun will work great to help get the mixture of neatsfoot oil/ beeswax to soak in to a holster. It also heats up the contact cement and allows the laminated leather to separate. Less heat and more hand rubbing held it all together thankfully. Vacuum packers are awesome at wet molding around objects. just make sure to place the outside face of the project against the smooth side of the bag. The textured side leaves lots of marks that can't be removed easily. Quote http://www.cgleathercraft.com Member of the Iron Brigade.
Members Tramps Leatherworking Posted November 21, 2014 Members Report Posted November 21, 2014 I learned after looking at the amazing craftsmanship by Hidepounder on his leather rope bag --- I should take up bowling... Quote ~Tramp~ Experientia magistra stultorum --- (Experience is the teacher of fools)
Members DoubleC Posted November 22, 2014 Author Members Report Posted November 22, 2014 Well I started this topic a long time ago and it's nice to see it brought up again because I just learned some more things Sharkey I have a show the first week of December and have known about it since the first week of November last year and haven't made a single new thing. Cradon I learned the uh metal, wet leather and dark spots a while ago I use bricks as weights, seriously. Nstar, that's a good thing to know. Where do you get no stick needles? CG, Have been there and done that. Hair dryer, leather, high heat and glue = uh, no no. Tramp, looking at Bobby Parks work makes most of us a tad suicidal, but oh how nice on the eyes I could talk about the things I've learned since I started this two years ago but it would probably depress me. I seem to learn a lot of things to not do!!!!! But I still love what I do and the folks here at LW.net. Quote http://www.etsy.com/shop/DoubleCCowgirl
Members DoubleC Posted November 23, 2014 Author Members Report Posted November 23, 2014 I'll have to get in touch with them and see if they work with a cobra. I haven't really had a problem yet, but I'd really like to try them. Thanks, Cheryl Quote http://www.etsy.com/shop/DoubleCCowgirl
Chief31794 Posted November 23, 2014 Report Posted November 23, 2014 Today I just relearned that your thumb does not make an effective stop for your knife blade, I tried to take the end of my left thumb off this afternoon, and I have 4 rifle slings to carve and finish. Gotta love Christmas but I hope this thing doesn't act up tomorrow when I'm trying to hold stamps. Chief Quote "Life's too short to carry ugly leather"
Members DoubleC Posted November 23, 2014 Author Members Report Posted November 23, 2014 Chief isn't it amazing how some lessons have to be relearned no matter how long you do this? Quote http://www.etsy.com/shop/DoubleCCowgirl
Members biglew Posted November 23, 2014 Members Report Posted November 23, 2014 recently i learned that I can't do everything.... but stupidity won't let me stop trying.... UGH Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.