Members byggyns Posted August 21, 2014 Members Report Posted August 21, 2014 Actually, while that sounds logical it doesn't hold true when compared to original pieces. Faulds, the lower banded skirt seen on some armors, can be seen in original pieces to overlap both upwards and a downwards. The same can be said of articulated breastplates, tassets (hanging thigh armor) and cuises (non hanging thigh armor). Do an image search for 14th or 15th century articulated breastplates, while a few will exhibit a downward overlap the vast majority will be seen to overlap with the upper edge exposed. Also check out Brian Price's "Techniques of Medieval Armour Reproduction", it's a great reference which shows both originals and reproductions and gives some explinations as to why armors were built the way they were. Thanks for this info. I was not aware of that. Is this true for both leather and metal plate? I would think that it may make more of a difference with the harder metal plate. But, I am neither an anthropologist nor an archeologist, I just like history. Quote
Members billybopp Posted August 21, 2014 Members Report Posted August 21, 2014 Anhurset, if you're ever in Philadlephia let me know. I'll take you to the Penn Museum which is 5 or 6 blocks from where I live. We went there a few months ago for a lecture by Zahi Hawass, and briefly got to meet him after. It was quite an experience. Best of luck with the rest of your schooling! Bill Oh .. And more on topic for this thread, I don't know anything about walnuts as a leather stain, but I CAN tell you that walnut husks will totally wreck the finish on a car! Quote
Members anhurset Posted August 21, 2014 Members Report Posted August 21, 2014 Actually leather armor appears to have followed deferent designs and design parameters than metal armors, though considering how little medieval European leather armor has survived (if I remember right there are a couple of vambraces which appear to have been parts of full arm harnesses and most of a single full leg harness) it's almost impossible to have an appropriate understanding of their design and construction. There are hundreds of composite armors such as coat of plates and armored jacks, but in the end those are more metal armor which happens to be held together with large sheets of leather, fabric or a combination of both. The armor patterns in this pack are inspired by metal armors and as such they should be layered in the way one would if constructing it out of metal. I'm not stressing historic accuracy here, I'm stressing proper construction based on what was done in period to ensure that the armors move and lay properly. Quote https://www.etsy.com/shop/bryanstancliff
Members dragonhawke Posted August 31, 2014 Members Report Posted August 31, 2014 I would look anything you release. Hard to find Steampunk patterns and there is a fairly large group in my area Quote Dragonhawke (A.K.A: Colin Edmiston) Medicine Hat, Alberta Canada
Members Henri1959 Posted October 22, 2014 Members Report Posted October 22, 2014 like to have a copy of that tank you :D Quote
Members takitty007 Posted October 25, 2014 Members Report Posted October 25, 2014 Hey, Thanks for the patterns! I too am trying to figure out how some of them go together... However, if you are still taking recommendations, a female chest piece would be nice :D Quote
Members tboyce58 Posted October 25, 2014 Members Report Posted October 25, 2014 I'm working on a Skyrim helmet. I'll post the pattern once I get it complete Quote
Members mrdabeetle Posted October 28, 2014 Author Members Report Posted October 28, 2014 (edited) Here is an updated link to the patterns. I apologize for the wait. I've been busy. Edited March 17, 2022 by Northmount Updated with link to patterns Quote
Members Greimalk Posted November 25, 2014 Members Report Posted November 25, 2014 (edited) I am also interested in the pattern pack; just a novice and want to learn how to craft leather armor and equipment better. Edited November 25, 2014 by Greimalk Quote
Contributing Member Bob Blea Posted November 26, 2014 Contributing Member Report Posted November 26, 2014 Mrdabeetle, let me join the others in thanking you for your efforts on this. I'm excited to try making a few pieces of this. History has always been a fascination of mine. Quote There are always possibilities.... Bob Blea C and B Leathercrafts Fort Collins, CO Visit my shop at http://www.etsy.com/shop/CandBLeather?ref=si_shop Instagram @bobbleacandbleather
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.