Ferg Report post Posted June 15, 2013 I guess it has been more than a year when a number of us drooled over some Italian Clicker knives among others. Clicker knives were used many years ago in the shoe industry. Trimming edges and cutting heavy leather. There are You-Tube videos of name brand manufacturers using a clicker knife to cut parts for many different items. I spoke to a good friend who makes fantastic knives about making at least two blades for me that would cut forever with nothing more than stropping. After several communications with my wishes and his knowledge I have two different blades. I have made one handle. I will enclose photos. I have made a number of wooden handles over the years and found that almost every human hand has something different about it when working with wood or leather and I am sure many other materials as well. Folks who make cutting knives for a living must try to make handles that will work for many different hand shapes etc. This handle is two pieces of solid brass with Purple Heart wood to the same thickness as the knife blade. One strip of the wood has been glued even with the two long edges of the brass plus a "plug" at the butt end of the handle. Blade and handle is held together with three brass screws. Blade has two holes to accommodate screws. You may note the handle is not exactly straight along the edges. I have found that the heavy brass and other metal handles need to "Cozy up" to your hand to be comfortable when working. I will probably do some further filing on this one as I use it. Simply a view of the one edge of handle. The business end. I wanted to show the blade entry into the end of handle not the blade itself. Time to make the handle occupied about 4 hours. I split it up into three or four sessions so I could still move my fingers when finished. I have no intentions of making any of these for sale. Am still thinking how I want to make the other handle. Questions? Just let me know. ferg Quote Share this post Link to post Share on other sites
Itch Report post Posted June 16, 2013 Nice work,I think it would just become an extension of your hand with a little practice.Good tools make working a pleasure.. Quote Share this post Link to post Share on other sites
SouthernCross Report post Posted January 21, 2016 I just came across this post. Nice knife. But where in the world would one find a piece of brass like that? Quote Share this post Link to post Share on other sites
TinkerTailor Report post Posted January 21, 2016 I just came across this post. Nice knife. But where in the world would one find a piece of brass like that? mcmaster-carr. Quote Share this post Link to post Share on other sites
Trox Report post Posted January 22, 2016 You could simply buy a finished knife from Blanchard http://www.fineleatherworking.com/leather-tools/indispensable-knife Or https://www.rmleathersupply.com/collections/vergez-blanchard-tools/products/l-indispensible-brass-knife-2-blades Or in Europe http://www.vergez-blanchard.fr/boutique/liste_rayons.cfm Tor Quote Share this post Link to post Share on other sites
Ferg Report post Posted January 22, 2016 Buying the brass is easy. There are companies selling small pieces of most any thickness you wish on the Net, just"Google" The knives I made are very easily done. I have in my shop a small bench top belt sander I used to rough out the shape I wanted. I then used 600-1000 grit sanding medium and finished with polishing compound on a "Flap" wheel. ferg Quote Share this post Link to post Share on other sites
zuludog Report post Posted January 25, 2016 (edited) They look similar to wood carving knives, except that the handles are brass instead of wood. But that means you could 'fine shape' the wooden handles easier to suit yourself I started a thread about this a few months ago, with some references to suppliers Small Clicker Knife by zuludog 11th November 2015 Leather Tools section Edited January 25, 2016 by zuludog Quote Share this post Link to post Share on other sites
zuludog Report post Posted January 25, 2016 (edited) SOUTHERN CROSS - I Googled for 'brass bar USA' and found these suppliers. No doubt there are others, so get Surfing http://www.onlinemetals.com http://www.metalsdepot.com Another method would be to shape & sharpen an old hacksaw blade, then fit a handle around it But it has to be a single thickness blade, not bimetal Edited January 25, 2016 by zuludog Quote Share this post Link to post Share on other sites
SouthernCross Report post Posted January 25, 2016 Thanks, zuludog. I found some "scraps" on ebay that will probably work. Quote Share this post Link to post Share on other sites
dikman Report post Posted January 25, 2016 Power hacksaw blades make pretty good knives (just don't overheat them if shaping with a grinder). Quote Share this post Link to post Share on other sites
TinkerTailor Report post Posted January 25, 2016 http://hydestore.com/knives-blades/industrial-hand-knives/blades Already ground for under 10 bux. Quote Share this post Link to post Share on other sites
Ferg Report post Posted January 25, 2016 Tink, I bought a couple of those blades to have as patterns. They aren't real great quality but they are cheap. My knives have blades that were made with the shape of two of these. ferg Quote Share this post Link to post Share on other sites
TinkerTailor Report post Posted January 25, 2016 Tink, I bought a couple of those blades to have as patterns. They aren't real great quality but they are cheap. My knives have blades that were made with the shape of two of these. ferg I have not used any modern hyde stuff, but i have a couple vintage fixed blades that are awesome. One that I use as my 'clicker' most everywhere with exception to tight inside curves i found in a set of tools dating back to at least the 60's but appears to have been an older set someone resurrected in the 60's. There are a couple things in there that really pre date the rest. This knife may be one. I like the handle size and the leverage i get. I can fist it and trim 20oz square no prob. The point is small enough to do complex patterns on chrome tanned holding it like a pencil, and the way the tip is ground you can use it to trim one layer without disturbing the under layer if you hold it vertically, and slide the knife along on the curved portion. This is nice for trimming linings. This knife needed a quick touch up on a stone initially and nothing but a strop or two before each use for a year or two now. It appears to be a modified hyde bevel point like this: http://hydestore.com/hyde-tools-61080-heavy-duty-bevel-point-bg268-2-x-1.html It really is my favorite leather knife Quote Share this post Link to post Share on other sites