Belt Slot Punch?

[MStarmer]

Okay I'm doing fairly well on most aspects of my holsters but these darn belt slots are my nemesis. I've conceded that I want to opt for a belt slot punch for 1.5" x .25 (or whatever their sizes run). I was looking on Springfield Leather where I've been buying most of my stuff and it's hard to tell the sizes, or they just list 1.5" and have a couple to pick from. I'm not sure what the difference is.

Anybody have a link to a affordable quality punch, or part number?

These are the two listed, I can't figure out what the difference is, maybe manufacturer I guess.

http://springfieldleather.com/16316/Punch%2COblong%2C%23151%2C-1%22/

http://springfieldleather.com/16307/Punch%2COblong%2CHeavyDuty%2C-1%22/

Thanks

Michael

[Haystacker]

I bought my punch from Texas Custom Dies. I was very picky in my dimensions. I ordered 1 and 9/16ths by 5/16ths. The first punch they sent me was not the right size. I did get the correct punch on my second try.

They sent the original set up for punching with a clicker. I ordered just the punch and I welded a socket on the top end. The socket fits my shop press.

Best luck.

[SooperJake]

+ 1 on Texas Custom Dies. I got mine made to be hand struck with a mallet. Works great. .375 x 1.6".

[MStarmer]

Was the price fair from these guys?

[Haystacker]

I paid $55 a few years ago.

[SooperJake]

$65 I think I paid, this year. I first bought one custom made from Weaver and it was completely dull. I paid to send it back for sharpening and it came back just as dull as it left. Total with twice shipping : close to $130. I've complained about that tool on this forum many times. Just trying to get my money's worth out of a tool I will never be able to use. I won't give Weaver a nickel of my money ever again, either.

[Red Cent]

Mine works fine for the price.

http://www.tandyleatherfactory.com/en-usd/home/department/tools/31564-144.aspx

[MStarmer]

My apologies I completely missed the Tool forum, I probably should have posted this there. I appreciate the replies from all, I may give Texas Dies a call.

[olds cool]

While we're on the subject.... What is the most commonly used size for the belt slots on holsters? I've been doing mine between 1.25-1.5" simply because it fits my personal belt. I too have been shopping around for a punch because I'm tired of doing them with a hole punch and a straight edge.

[chiefjason]

I have one of the Springfield punches. It's a great punch, but it's not wide enough for a gun belt. I had to punch it twice. I went back to punching the top and bottom and bought a French Skivver in 1.5" to cut the middle.