Members jkbuzbee Posted January 10, 2014 Members Report Posted January 10, 2014 here it is 1.5in on the 3400rpm motor to a 10in with a 1.5 headed to the machine total cost 48.00 maybe I should have just bought a servo motor but whats the fun in that lol still might up grade one day hope the pics upload first time trying to upload Quote
Members Constabulary Posted January 10, 2014 Members Report Posted January 10, 2014 Cool, always nice to see other ideas but does your wife know the laundry machine is missing parts now ;-) Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Contributing Member JLSleather Posted January 10, 2014 Contributing Member Report Posted January 10, 2014 That's quite the drop -- working better for you now? Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members jkbuzbee Posted January 10, 2014 Author Members Report Posted January 10, 2014 o yah it slowed it way down!!! and that's what I need just starting out lol lol she dont know yet she will find out when she trys to wash them tonight lmbo Quote
Members Constabulary Posted January 10, 2014 Members Report Posted January 10, 2014 Buy some flowers first... Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members joeyrsmith Posted January 11, 2014 Members Report Posted January 11, 2014 (edited) Very nice. Gives me ideas now. Just got a Singer 211g setup with a 1.75 pulley and its still too fast. Might steal your setup if ya dont mind Any tips or tricks with it? Thx Joe Edited January 11, 2014 by joeyrsmith Quote
Members pcox Posted January 11, 2014 Members Report Posted January 11, 2014 (edited) There is a simpler way. Edited January 11, 2014 by pcox Quote
Members joeyrsmith Posted January 11, 2014 Members Report Posted January 11, 2014 (edited) Cool, pcox, my man---who has helped me like a Pope helping a sinner!!! I know, I know some Popes are better than other Popes! I mean a great Pope helping a bad sinner. Are you using a small pulley on the motor like I have or something bigger? I got the machine with a 3.5in pulley. Thx Joey Edited January 11, 2014 by joeyrsmith Quote
Members cdthayer Posted January 11, 2014 Members Report Posted January 11, 2014 Good ideas jkbuzzbee and pcox. I’m sure there are a lot of us out here with older machines that need to be slowed down a little bit. I like the factory-built speed reducer on my Consew 225 (that I just got rigged up) well enough that now I’m starting to think about what I can do with my Singers 111W153 and 111G156 to tame them down a little. I don’t have another factory-built speed reducer, so thanks for the suggestions. CD in Oklahoma Quote "I sew, I sew, so it's off to work I go....." My sewing machines:Adler 205-370 (Hand Crank), Adler 205-64 (Hand Crank), Consew 226 (Clutch/Speed Reducer), Singer 111G156 (Hand Crank or Clutch), Singer 111W153 (Clutch), Singer 20U33 (Clutch), Singer 78-3 Needlefeed (Treadle), Singer 20U (Treadle), Singer 29K70 (x2) (Both Treadle/Hand Crank), Singer 96-40 w/Darning Foot (Treadle), Singer 31-15 w/Roller Foot (Treadle), Singer 31-15 (Hand Crank), Singer 16-41 (Treadle), Singer 66-1 (Treadle/Hand Crank), Singer 201K4 (Treadle/Hand Crank), Singer 216G Zigzag (Treadle/Hand Crank), Singer 319W (Treadle)
Members joeyrsmith Posted January 11, 2014 Members Report Posted January 11, 2014 (edited) Ok guys, help me out here a little. I see pcox has what looks like the original wheel with the stitch markings on it. My 211g has only one hub/wheel with stitch marks and belt channel. So my whole wheel would have to come off, ??? on how to regulate my stitch length has me a little baffled. Ideas on that would be great. Thx Joe Think I kinda figured it out. As long as there is something attached to the drive shaft, I can lock the hook shaft below with deck button and operate as usual. Edited January 11, 2014 by joeyrsmith Quote
Members jkbuzbee Posted January 11, 2014 Author Members Report Posted January 11, 2014 Joey you lost me on this one lol I know the reducer I have works well but now that I change my needle and thread to a 22/138 now I'm having trouble with my bobbin thread I can't get it to pull up thru the bottom I might have my needle in wrong I'll play around with it some more tonight Quote
Members joeyrsmith Posted January 11, 2014 Members Report Posted January 11, 2014 jkbuzbee, I am going on pcox's reply with the larger handwheel earlier in your thread. I have figured out how to do yours. Hardware store here in the Fl Keys has the parts. Dont have many stores down here. Quote
Members pcox Posted January 12, 2014 Members Report Posted January 12, 2014 Hope these pics help. I pulled the pulley/hub off the shaft and turned the pulley hub down to 1 inch in my lathe then filed a flat for the set screw on the 6 inch pulley. slipped it all back together, fitted a longer belt. Instant happy. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.