Doc Reaper Posted June 27, 2014 Report Posted June 27, 2014 What is the thinnest Leather a CB4500 will sew! Can it sew leather to make biker chaps or should I use something different? This might be a question with only one outcome. Quote Doc Reaper
Moderator Wizcrafts Posted June 27, 2014 Moderator Report Posted June 27, 2014 What is the thinnest Leather a CB4500 will sew! Can it sew leather to make biker chaps or should I use something different? This might be a question with only one outcome. I sew chaps and zippers on jackets with my CB4500. I rethread it with #138 top and bottom, using a Schmetz #23 leather point needle. Back off the bobbin tension (should happen automatically if changing from previous #277) and top tension. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Doc Reaper Posted January 13, 2022 Author Report Posted January 13, 2022 Let’s update this just a bit, it’s been just under 8 years, i founder a thinner needle plate (thanks Aussie) and now my Cowboy 4500 will sew whatever I need it to! Quote Doc Reaper
Members TomE Posted January 13, 2022 Members Report Posted January 13, 2022 14 minutes ago, Doc Reaper said: Let’s update this just a bit, it’s been just under 8 years, i founder a thinner needle plate (thanks Aussie) and now my Cowboy 4500 will sew whatever I need it to! Ditto for my Cobra Class 4. The narrow plate and feed dog handle the heavy and light leather projects without a lot of fiddling. @Doc Reaper do you have any uses for the original plate/feed dog now that you're using the narrow setup? Quote
Doc Reaper Posted August 9, 2022 Author Report Posted August 9, 2022 On 1/13/2022 at 7:15 AM, TomE said: Ditto for my Cobra Class 4. The narrow plate and feed dog handle the heavy and light leather projects without a lot of fiddling. @Doc Reaper do you have any uses for the original plate/feed dog now that you're using the narrow setup? Sorry TomE, I just found this, it’s just sitting in the CB4500 ditty drawer (I seriously have to make a larger unit to store items in like drawers) why do you ask??? Quote Doc Reaper
Members PAMuzzle Posted August 11, 2022 Members Report Posted August 11, 2022 I bought the same plate/feed dog and was able to sew 2 layers of t-shirt material with #277 thread. It was a test and that was the smallest thread I have. Quote
Members dikman Posted August 11, 2022 Members Report Posted August 11, 2022 The thread would have been thicker than the material! Seriously, that is a pretty good effort. Quote Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500. Chinese shoe patcher; Singer 201K (old hand crank)
Members PAMuzzle Posted August 11, 2022 Members Report Posted August 11, 2022 (edited) Yeah it is. Puckered a little but I did not change tension from my leather settings. Did not pull material into machine. Edited August 11, 2022 by PAMuzzle Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.