Members elthoma Posted June 30, 2015 Members Report Posted June 30, 2015 Hello everyone: I am new to the forums, but have garnered some really great information. I came across this GA5-1R that has been converted to be Hand Cranked, http://www.ebay.com/itm/221774256185?_trksid=p2060353.m1438.l2648&ssPageName=STRK%3AMEBIDX%3AIT I was wondering the viability of such a modification? I have a Sailrite LS-1 with the Monster Wheel and it does fine when turned by hand with thin leather. I would appreciate a more experienced opinion of this, as it would be great for Boy Scouts. Thank you Ed Quote
Moderator Wizcrafts Posted June 30, 2015 Moderator Report Posted June 30, 2015 (edited) Ed; If you live in Australia (the machine is in AU) this machine is a good option for a starter in the business. It has single feed, from an aggressive feed dog on the bottom. This is well suited to sewing horse blankets and saddle components, where the bottom being marked is not too important. Hand cranked machines take away one hand that would normally guide the material. You may tire your arm out quickly if you have to sew long straps, or doubled rows of stitching, or decorative stitching. Note, that the same type of machine is sold in the US and Canada by several of our member-dealers. A Barney wheel can be added to the hand wheel for unpowered sewing. In fact, Bob Kovar, of Toledo Industrial Sewing Machines, recently posted a photo of a similar machine (CB3200) with a Barney wheel he added to hand spin it. Edited June 30, 2015 by Wizcrafts Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members elthoma Posted June 30, 2015 Author Members Report Posted June 30, 2015 Wizcrafts, Thank you very much, now my question: What is a Barney Wheel? Ed Quote
Members Constabulary Posted June 30, 2015 Members Report Posted June 30, 2015 Depends on what you want to sew. Maybe a patcher sewing machine like a Singer 29K is the better option. Most of the 29K have a hand wheel that you can move from the right side to the front side. I think it is more comfortable for the Boy Scouts to sew with But the 29K has of course it´s limitatations. Maybe this video gives you an idea Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
CowboyBob Posted June 30, 2015 Report Posted June 30, 2015 We had an inmate from Texas send us an order for a CB3200 handcrank so we made him one. Handcrank CB3200.MOV Quote Bob Kovar Toledo Industrial Sewing Machine Sales Ltd. 3631 Marine Rd Toledo,Ohio 43609 1-866-362-7397
Moderator Wizcrafts Posted June 30, 2015 Moderator Report Posted June 30, 2015 Wizcrafts, Thank you very much, now my question: What is a Barney Wheel? Ed I meant Barney Knob. Sorry for the mistake. It is a free-spinning add-on steering wheel knob that originated in the mid-1950s. They clamped around the wheel to let the driver spin the steering wheel one-handed, while his right arm was around his girlfriend. Barney Rubble may have had one on his steering wheel. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Moderator Art Posted June 30, 2015 Moderator Report Posted June 30, 2015 Wiz, You mean a "suicide knob". Had one on my 53 Chevy (well, my dad's), it didn't have power steering and was about 99 turns of a two foot diameter steering wheel lock to lock. Art Quote For heaven's sakes pilgrim, make yourself a strop!
Cobra Steve Posted June 30, 2015 Report Posted June 30, 2015 We also have the knob that is used for turning most hand wheels. We also have the extension arm to make it easier to turn than the knob. We have done both styles many times. Quote Thank You Steve Tayrien Leather Machine Co., Inc. 2141 E. Philadelphia St. Unit "U" Ontario, California 91761 1-866-962-9880 http://www.leathermachineco.com cobra@leathermachineco.com
Moderator Wizcrafts Posted June 30, 2015 Moderator Report Posted June 30, 2015 Wiz, You mean a "suicide knob". Had one on my 53 Chevy (well, my dad's), it didn't have power steering and was about 99 turns of a two foot diameter steering wheel lock to lock. Art I had one on the 56 Olds my cousin and I shared. It had the Rocket engine and fur dice. The knob was cool and we never got hurt by it. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members elthoma Posted June 30, 2015 Author Members Report Posted June 30, 2015 That I understand, we had one on my Dads 47 cab over Wiley's, that was a monster to handle at ten across the ranch: Everyone thank you for your replies, I am now figuring out which way might be best to go. This forum is the best and so is everyone here Quote
Members cdthayer Posted July 2, 2015 Members Report Posted July 2, 2015 I have an Adler 205-64 with a Brodie Knob (suicide knob, spinner knob, necker knob) on it that works good for repair work.Photos in another thread here: Adler 205-64http://leatherworker.net/forum/index.php?showtopic=51731&page=2&hl=suicide#entry368191CD in Oklahoma Quote "I sew, I sew, so it's off to work I go....." My sewing machines:Adler 205-370 (Hand Crank), Adler 205-64 (Hand Crank), Consew 226 (Clutch/Speed Reducer), Singer 111G156 (Hand Crank or Clutch), Singer 111W153 (Clutch), Singer 20U33 (Clutch), Singer 78-3 Needlefeed (Treadle), Singer 20U (Treadle), Singer 29K70 (x2) (Both Treadle/Hand Crank), Singer 96-40 w/Darning Foot (Treadle), Singer 31-15 w/Roller Foot (Treadle), Singer 31-15 (Hand Crank), Singer 16-41 (Treadle), Singer 66-1 (Treadle/Hand Crank), Singer 201K4 (Treadle/Hand Crank), Singer 216G Zigzag (Treadle/Hand Crank), Singer 319W (Treadle)
Members elthoma Posted July 2, 2015 Author Members Report Posted July 2, 2015 I just wanted to thank everyone, I have spoken with Ryan of Neels Saddlery, he is only about 100 miles from my house and I decided to go with a Cowboy 3200: Now I just have to wait for it to come and go get it. Quote
Members Darren Brosowski Posted July 6, 2015 Members Report Posted July 6, 2015 Hi all, That is my machine on eBay Australia. Obviously if you are going to run the machine one handed you need a roller guide and I supply that with the machine. Quote
Members Darren Brosowski Posted July 6, 2015 Members Report Posted July 6, 2015 Long arm 441's are too awkward but anything else can be hand cranked! Not as good as a treadle but a good way to go and they can always be put on a table later on We also have the knob that is used for turning most hand wheels. We also have the extension arm to make it easier to turn than the knob. We have done both styles many times. Quote
Members Kulafarmer Posted November 29, 2015 Members Report Posted November 29, 2015 I was thinking peddle powered, not like a treadle but like bike hardware, good control and good power potential. Leaves hands free Quote
Members Darren Brosowski Posted December 2, 2015 Members Report Posted December 2, 2015 That is my listing LOL Hello everyone: I am new to the forums, but have garnered some really great information. I came across this GA5-1R that has been converted to be Hand Cranked, http://www.ebay.com/itm/221774256185?_trksid=p2060353.m1438.l2648&ssPageName=STRK%3AMEBIDX%3AIT I was wondering the viability of such a modification? I have a Sailrite LS-1 with the Monster Wheel and it does fine when turned by hand with thin leather. I would appreciate a more experienced opinion of this, as it would be great for Boy Scouts. Thank you Ed The 441 is waay too long to hand crank. The CB3200 is a good option Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.