Jump to content
Katariina

Whats Wrong, Stitching Looks Crappy!

Recommended Posts

its been going on all along! When ever I have to back stitch the back side of my work looks like this!! So frustrating! What should I do!

Edited by Katariina

Share this post


Link to post
Share on other sites

Couldn't get pick attached, file seems too big? But any way, the back side of work looks like a birds nest! when going forward everything's ok. Any suggestions?

Share this post


Link to post
Share on other sites

We're speaking about a sewing machine, right? Should have asked this in the chat this morning. The right man was in the room then. However I guess it would help others to help you if they would know what kind of machine you are using and what your settings are. To me it sounds like a thread tension issue but I'm no sewing machine expert.

Share this post


Link to post
Share on other sites

Thanks Thor, and too bad is right. I'd suppose it would be a tension problem, even I've worked with my Pfaff for quite a while. it seems like the problem has always been there, or at least for a long time. My leather sewing machine is a 335- H2- 17/01, Pfaff, that's what it says on the front plate. I do know how to fix the tensions up and below, but the problem is that the under thread gets all tangled when I back stitch. When I go forward, the stitch is perfecto! I'll just have to wait for some guru to help me out on this one!

Share this post


Link to post
Share on other sites

I'm not a machine guru, but......

Could it be thread/needle size? Could the back stitching be making the holes just that bit too small, causing the thread to get stuck underneath. The reduced space may be gripping the thread, and not allowing it to tension properly.

Does the same thing happen when you do a row of reverse stitches only. If you then stitch forward on that row, is it ok, or does it birdnest underneath.

Share this post


Link to post
Share on other sites

Thanks Lumpen Doodle, I get what your saying about the needle size, I'm going to try with a larger needle! Then I'll check the other thing too! Thanks a million! I'll get back after I've tried!

Share this post


Link to post
Share on other sites

Hi Katariina, right click your picture,Edit,Resize,Pixels, 50% or less. example when you click on pixels and it shows 3780 then i usually change it to 1780.

Share this post


Link to post
Share on other sites

Thanks jimi!

Everything's so complicated when working with an I Pad, but I'm downloading an app now :)

Share this post


Link to post
Share on other sites

:thumbsup: i have some books stacked in front of my 335, i will move them and try to have a look at the backstitch?

Share this post


Link to post
Share on other sites

post-32832-0-57499800-1447885732_thumb.jpost-32832-0-70054500-1447885473_thumb.jpost-32832-0-46815700-1447885498_thumb.jpost-32832-0-46936200-1447885514_thumb.jpost-32832-0-35680500-1447885528_thumb.jpost-32832-0-87427300-1447885546_thumb.j

Hiya Kat, i have tried with thinner thread and thinner leather 1 then 3mm then changed the thread from thinner to the one in the picture with the same needle 120 and this is the results. if i back stitch for a long length the thinner cheaper thread starts to untwist?? but does not bunch up underneath?? maybe try another type of thread if you have one handy, it might turn out perfecto?? regards jimi.

Edited by jimi

Share this post


Link to post
Share on other sites

Katariinaaaaa! so what happened with your back stitches in the end? perfecto or no perfecto?

Share this post


Link to post
Share on other sites

Hola Jimi! I really really haven't even checked that I've got these answers and pictures from you! I've been so busy with one dumb project that I'll have to work on getting my stitch perfetto afterwords! I'm trying to sew on a zipper to a drum case and it's giving me loads of trouble!!

post-67342-0-47294300-1450281923_thumb.j

post-67342-0-32503500-1450281969_thumb.j

Share this post


Link to post
Share on other sites

:thumbsup: sorry, i will let you got on with your work! looks tricky trying to get it fit right? the old and the new don´t like each other somtimes?? :thumbsup:

Share this post


Link to post
Share on other sites

I had the same problem with balled up stitches doing a lock stitch on my new Seiko. Shop owner in Yoakum said to lessen bobbin tension. Fixed the problem for me on my machine. Hope it works for you.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...