Another red handbag

[olenawills]

22 hours ago, JMWendt said:

What material did you use for the lining, pockets, etc (inside)?  Really very nice work.

All leather. Black lamb. I work in garment district in Manhattan and very often can go to the local leather shops and dig in discounted leather piles. Red leather was a discounted piece, good enough to work around the imperfections and still make two large bags. For the lining this time I couldn't find anything like this, so had to go for somethings at the full price.  I think goat would be better for this job, but I couldn't find any there. 

Body of the bag backed with the thin red lamb leather as well for additional stability. 

Handles have 10mm round leather cord. Bottom and the closing strap have 1mm bonded leather insert for additional stability. 

Edited May 27, 2016 by olenawills

[olenawills]

[5 Spice]

Beautiful bag!

[RockyAussie]

Very very nice for a first serious work. One thing I learnt to do and I'm not sure in the end you didn't, is where the handles attach to the bag to put a leather piece right to the edges over the inside part covering the cord area. When the handles in time drape downward they start to open up and pull the stitching open. With the leather cover piece the pressure is highly more resistant to folding back. Arn"t they fun to stitch? Hope that you find this useful.

[olenawills]

Useful tip. Thank you very much!

Handles were difficult to punch, stitching was easy 

[JMWendt]

On 5/29/2016 at 3:04 AM, RockyAussie said:

Very very nice for a first serious work. One thing I learnt to do and I'm not sure in the end you didn't, is where the handles attach to the bag to put a leather piece right to the edges over the inside part covering the cord area. When the handles in time drape downward they start to open up and pull the stitching open. With the leather cover piece the pressure is highly more resistant to folding back. Arn"t they fun to stitch? Hope that you find this useful.

Can you further explain this?  I think I know what you are saying, but I can't quite picture the solution.

[RockyAussie]

To picture the solution is probably the only way I guess. I am at the end not good with words. I hunted around until I found this old prototype. As you see when you pull the handle out it puts a lot of tension on the thread and handle. By putting a leather cover over it it makes it a lot harder to pull away from the bag. In the yellow cardboard pattern the red line shows the finished size about of the reinforcing piece. Once put on it makes it also a lot easier to attach and sew to bag. As you can see by the other 2 pics of some croc bags, they sell for many thousands of dollars and it takes a lot of time to fix if you don't do it well, let alone your reputation. Hope that help in answering your question. Nearly forgot, The pink piece is a plastic piece which I cut out of the covers like the black  one underneath it. It is a folder for holding A4 sheets in plastic sleeves from office supplies. Inserted between the lid layers it allows the lid to spring back into shape without any creases and wrinkles. It works brilliantly in these type of flip open and shut lids.

[olenawills]

My handles have slightly different pattern and I sew them all way around a "leaf" , there is no way I can see any reverse side of the handle with cord. 

In my bag for reinforcements I use bonded leather glued between the layers.

For the top flap in between flap and the back side of the bag I added a narrow folded leather piece. I saw it in Hermes bag. Just go into a Hermes shop, ask to try a bag and look inside under the flap  or examine a details photos from eBay. Some sellers add good detailed pictures to their listings. 

[olenawills]

[olenawills]