Members beginningsaddleman Posted June 19, 2016 Members Report Posted June 19, 2016 I am considering purchasing this machine from Bantam Saddle Tack and have read disparate reviews on this site. Members Darren Borowski and Aunt Bonny's Place (pardon me if I have misspelled or misquoted names). The machine sells for $189 + shipping and is an affordable option. I fully understand the Chinese manufacturing methods and problems inherent with purchasing from China. I cannot purchase the machine from Australia and pay again to have it shipped. I am requesting any information about timing adjustments and needle placement/threading. I would even consider purchasing a support package. Please let me know if anyone can help. Quote
Members beginningsaddleman Posted June 19, 2016 Author Members Report Posted June 19, 2016 Sorry, the picture didn't upload the first time. Quote
Members brmax Posted June 19, 2016 Members Report Posted June 19, 2016 I think and most here do as well the Company, seller and buyer is first to contact on operations of equipment and an easier transfer of manuals and or their available technical support recommended. With that, there is like 69,000members so there is a lot of help on one day or another by many contributors happy to share a thought or some of their experience. Good day there Floyd Quote
Hockeymender Posted June 19, 2016 Report Posted June 19, 2016 I purchased a similar machine from Robin Industries in China. They were great to deal with and everything went smoothly. I would not hesitate to buy from them again. The machine was as rough as a cob. I had to invest quite a few hours cleaning, polishing and making minor adjustments. After all that was accomplished, it was really a good machine. It would sew well and was quite easy to use ( at least in my opinion). It did well with both thick and thinner materials. I tried it with 138 and 207 thread and it didn't complain. If you are not afraid to dive in and do some basic set up work, these machines are a good thing, and with what they sell for it really is hard to go wrong. Quote Regards, Joe Esposito www.hockeymenders.com instragram: @hockeymenders.com
Members dikman Posted June 19, 2016 Members Report Posted June 19, 2016 I agree with Hockeymender. They're a very basic (some might call them agricultural) machine, but pretty solid. I stripped mine and spent some time smoothing various parts, while it may not be necessary it's the sort of thing I do. The bobbin winder is pretty useless so I made a replacement from bits and pieces of some domestic machines I'd gutted for parts. Possibly the biggest issue might be the foot, the teeth are pretty vicious on it, but nothing that can't be overcome. There's a couple of usefull vids on youtube about them, search on boot patcher. Quote Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500. Chinese shoe patcher; Singer 201K (old hand crank)
Members beginningsaddleman Posted June 19, 2016 Author Members Report Posted June 19, 2016 Thank you for the feedback. I'm limited on space and budget, so this machine look like it can handle the work I'm aiming for. When it comes in, I may post again to ask for help from you that have been there before. Not afraid to work and very mechanically inclined, but a little experienced guidance will cut my workload in half. Thanks for the information. Quote
Members Darren Brosowski Posted July 5, 2016 Members Report Posted July 5, 2016 In terms of build quality I am happy to state that these are the roughest machines ever built. Virtually every part is modified to fit the frame so that the machine will work. On the other hand the bloody things are almost indestructible once they are set up properly. Recently someone asked me to fix one of the machines I sold 6 years ago - they bought it at an auction. Once I cleaned the wasp nests out of the needle bar it worked perfectly Quote
Members dikman Posted July 6, 2016 Members Report Posted July 6, 2016 11 hours ago, Darren Brosowski said: In terms of build quality I am happy to state that these are the roughest machines ever built. Virtually every part is modified to fit the frame so that the machine will work. On the other hand the bloody things are almost indestructible once they are set up properly. Recently someone asked me to fix one of the machines I sold 6 years ago - they bought it at an auction. Once I cleaned the wasp nests out of the needle bar it worked perfectly Your post made me laugh - particularly the last sentence! Quote Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500. Chinese shoe patcher; Singer 201K (old hand crank)
Members needmoretools Posted May 7, 2018 Members Report Posted May 7, 2018 I recently acquired a Robin Industries side wall stitcher unused with some other purchases. No user manual, threading diagram, etc. can anyone supply a copy of the manual? Offer tips ? Quote
Moderator Wizcrafts Posted May 7, 2018 Moderator Report Posted May 7, 2018 7 minutes ago, needmoretools said: I recently acquired a Robin Industries side wall stitcher unused with some other purchases. No user manual, threading diagram, etc. can anyone supply a copy of the manual? Offer tips ? @robinindustry is a member here and recently posted a new topic about their newest sole stitcher. I'm sure they can get you a manual for your Robin sidewaller. Tell them the model number in a private message. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.