Members Ian1783 Posted January 29, 2017 Members Report Posted January 29, 2017 My Singer 153W103 came with what I figure must be an older table. It is much more light-weight than the K-leg table for my Chandsew. As can be seen in the photo, it uses a tubular bar for its pedal support, but I don't have the pedal. Can the original pedal-type be found easily (and cheaply) enough, or is there some option for a pedal replacement when i get a servo motor for this machine? Ian, SF Bay Area Quote
CowboyBob Posted January 29, 2017 Report Posted January 29, 2017 Yes,there are pedals that fit that style of leg. Quote
Members Ian1783 Posted January 30, 2017 Author Members Report Posted January 30, 2017 (edited) Are they something Toledo carries, or are they more an item I'd have to source through the catch-as-catch-can parts community? I'll only need the motor-pedal, as my wife seems not to use the knee-lift on her Chandsew, and would probably have no use for the foot-lift on this machine. Ian, SF Bay Area Edited January 30, 2017 by Ian1783 Quote
Members ndnchf Posted January 30, 2017 Members Report Posted January 30, 2017 I have a pedal from a 31-15 industrial table, I think its the same one. its a bit rusty, but would clean up ok. PM me if interested, I can send a photo. Steve Quote
Members Gregg From Keystone Sewing Posted January 30, 2017 Members Report Posted January 30, 2017 Quote
Members Yetibelle Posted January 30, 2017 Members Report Posted January 30, 2017 You can get a fancy old cast iron treadle pedal from Ebay cheep and just clamp it on. They would look nice on that old style table. http://www.ebay.com/itm/ANTIQUE-SINGER-SEWING-MACHINE-CAST-IRON-TREADLE-FOOT-PEDAL-BLACK-1874-1875-/371830930596?hash=item5692d9bca4:g:2VgAAOSwa~BYQbRt Quote
Members Ian1783 Posted January 30, 2017 Author Members Report Posted January 30, 2017 Thank you all for the feedback! And Yetibelle, that's a great suggestion! It's true that mine has an older look, and the cast-iron may match well, provided it attaches properly. Greg, your suggestion looks to be what I recall as my table's original pedal. Just what are those "extensions"? Do they go from the pedal to the motor? I have a link-chain that I'm sure is for the presser-lift pedal. I also have a rod with hook-end, with a clamp that I think is meant to hold two rods (for length adjustment), but I'm missing one of those rods. Ian, SF Bay Area Quote
Members dikman Posted January 30, 2017 Members Report Posted January 30, 2017 Ian, referring to Gregg's photo, you can see a row of holes along the front edge of the treadle, the extension bolts on there. It provides an adjustment for the connection rod(s) from the treadle to the motor, depending where the extension is bolted to the treadle, allowing the rods to be more in line with the motor. Quote
Members Ian1783 Posted January 30, 2017 Author Members Report Posted January 30, 2017 I see, and aligned more vertical with the pull-point on the motor's lever. Makes sense. Ian, SF Bay Area Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.