Members Constabulary Posted July 26, 2017 Members Report Posted July 26, 2017 (edited) I have 2 needle plates that fit the 30-1 + the screw BUT the plates have been reworked around the needle hoe (brazing) - will add pictures a bit later... Edited July 26, 2017 by Constabulary Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members Constabulary Posted July 26, 2017 Members Report Posted July 26, 2017 One plate still needs "new holes" one already has a new hole the other hole is still nice, for sure not perfect but this is all I have... Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members Hooksetz Posted July 26, 2017 Author Members Report Posted July 26, 2017 Constabulary, how much? And where do I send the money? I just got off work, and was dreading the process of grinding and drilling....lol Quote
Members Gregg From Keystone Sewing Posted July 26, 2017 Members Report Posted July 26, 2017 Here's the parts for Adler 30-1. To the best of my knowledge, every part is both available, and very expensive. Adler 30-1.pdf Quote Industrial sewing and cutting, parts sales and service, family owned since 1977, Philadelphia, Pennsylvania USA, 215/922.6900 info@keysew.com www.keysew.com
Members Constabulary Posted July 26, 2017 Members Report Posted July 26, 2017 2 hours ago, Hooksetz said: Constabulary, how much? And where do I send the money? I just got off work, and was dreading the process of grinding and drilling....lol I sent you a PM Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members shoepatcher Posted July 26, 2017 Members Report Posted July 26, 2017 Hooksetz, There are no generic throat plates for Adler shoepatchers. I have looked for years and want to build some for sale when I retire in a few months. Not all parts for the 30-1, 5, 7, & 15 are still available. I have been told a throat plate for a 29-4 will fit an Adler 30-1. Believe it or not, I have never tried one to see if it will fit. I hope to remedy that in the near future. I have a lot of genuine Adler replacement parts and screws available. Throat plates are not one of them. glenn Quote
Members thunter9 Posted July 26, 2017 Members Report Posted July 26, 2017 check with Ralph's industrial sewing machine in denver Quote
Members Hooksetz Posted July 27, 2017 Author Members Report Posted July 27, 2017 Thank you all very much, I have only just found this site and could not be more pleased with the help I have gotten...The parts are coming from Germany, and thank you again very much Constabulary... Quote
Members Gregg From Keystone Sewing Posted July 27, 2017 Members Report Posted July 27, 2017 4 minutes ago, Hooksetz said: Thank you all very much, I have only just found this site and could not be more pleased with the help I have gotten...The parts are coming from Germany, and thank you again very much Constabulary... That the way to do it, good job getting it done. Quote Industrial sewing and cutting, parts sales and service, family owned since 1977, Philadelphia, Pennsylvania USA, 215/922.6900 info@keysew.com www.keysew.com
Members Hooksetz Posted August 3, 2017 Author Members Report Posted August 3, 2017 Update, package arrived from Constabulary....could not be happier, Adler parts definately fit an Adler machine....lol....now to learn a new art....the art of sewing with a machine...lol Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.