Jump to content

Recommended Posts

  • Members
Posted

Hello to all,  The situation is when locking my stitch. It seems no matter when I use reverse the stitches always seem to get knotted up. I've tried putting in Rev. when the needle is down all the way, Same thing happens. Tried it with needle up all the way, still same results. I'm using Cowboy 3200, 277 thread top and bottom. The results are ugly. Can someone please advise me on the proper procedure for locking stitches. Thanks.  ( only on the backside of leather piece )

Posted

 

  On 7/25/2017 at 11:08 PM, torker32 said:

Hello to all,  The situation is when locking my stitch. It seems no matter when I use reverse the stitches always seem to get knotted up. I've tried putting in Rev. when the needle is down all the way, Same thing happens. Tried it with needle up all the way, still same results. I'm using Cowboy 3200, 277 thread top and bottom. The results are ugly. Can someone please advise me on the proper procedure for locking stitches. Thanks.  ( only on the backside of leather piece )

Expand  

For many machines, reverse after the needle has started to rise.  So the hook has caught the loop.

Tom

  • Members
Posted

I have always thrown it in reverse after the needle travels upwards and before it leaves the leather like Northmount had mentioned. 

 

Rob

www.ridgewayleatherworks.com 

IG: @Ridgewayleatherworks

FB: RidgewayLeatherworks

  • Members
Posted

Thanks for the reply guys. I'll use that method of putting the machine in Reverse when the needle has caught the loop, and has not left the leather piece. Again thanks.

Posted

How's it working? Usually I tell people when it loops underneath to double check the threading or tighten the top tension alittle.Looping is almost always loose upper thread tension.

Bob Kovar
Toledo Industrial Sewing Machine Sales Ltd.
3631 Marine Rd
Toledo,Ohio 43609
1-866-362-7397

toledo-banner-2.jpg

  • Members
Posted

I stitch on the machine nearly everyday. My machine is a Typical cylinder arm, the back stitches are not perfect - but I have gotten better at it. One thing you should think about is using a lighter thread in the bobbin. I have found (after 20 years of sewing experience) when you have a thick top thread, the bobbin needs something slightly thinner. That might help with the knotting issue and thread jams.

When I sew with a topsttich thread, I never use the same thread in the bobbin. I buy the same thread color in 2 weights, lighter in bobbin.

Teresa

  • Members
Posted

To answer some comments, Thanks for the advice. I made an inside carry holster the other day. I used the method of putting the machine in Rev while the needle was on the up stroke, but still in the leather piece. It did result in a much cleaner stitch. I'll continue to use this procedure. On the comment of using a lighter thread on the bobbin, seems like a good method. I've heard of that before. Might be a time to change.  The Tension procedure seems like it would work, because the loops were always on the bottom piece. Will give that one a try. Again Thanks for the advice.  ( I'll attach pics next time, Like they say, Pics or it didn't happen.)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...