garypl Posted August 3, 2017 Report Posted August 3, 2017 I made my first dog collar using a crocodile (or alligator? I don't know how to tell them apart) embossed 1-1/4" belt blank I bought from local Tandy store. I lined it with 3-4 oz veg tan and sewed it with 207 thread. Buckle and D ring secured with Chicago screws. Fiebings oil dye and finished with Resolene followed by wax. Edges are finished with two coats of Giardini black edge paint. I hope it's not too thick - I made it for my son's dog (50 lb pit bull named Petey) and I wanted it to be secure. I think it will soften up a bit with use. I hand stitched the buckle end with .8 mm Tiger thread, but it looks a lot whiter than I expected compared to the other thread I used - guess if it doesn't blend in more with use I can always reset this part. i think for my next collar I will try some bridle or Latino leather - any suggestions which would be better? i appreciate all comments and criticisms! Gary ' Quote
alpha2 Posted August 3, 2017 Report Posted August 3, 2017 Looks good to me! I've done 3 of them lately, all to rave reviews, waiting for the orders to flock in. The recipient (neighbor) works at the local vet's office, so this could work out. Did get two more knife sheath orders today, though! More work, but more money, so it's all good! Quote
garypl Posted August 3, 2017 Author Report Posted August 3, 2017 Thanks Alpha - I should have proofread before I submitted my original,post - meant to say I might resew the buckle end and maybe use latigo next time - darn spell checker! What type and weight leather do you use for the collars you make? Gary Quote
Members ByNelson Posted August 3, 2017 Members Report Posted August 3, 2017 I use 1-1/4 and 1-1/2 (3,2 cm - 3,8cm) in my collars ... I use vag tan shoulder. Works great... I like your collar and nice stitching! Quote
Mark842 Posted August 3, 2017 Report Posted August 3, 2017 Looks awesome! Looking in at the inside at the stitching I would say maybe take a cobblers hammer to it and flatten down the stitching some. Quote
garypl Posted August 3, 2017 Author Report Posted August 3, 2017 3 hours ago, ByNelson said: I use 1-1/4 and 1-1/2 (3,2 cm - 3,8cm) in my collars ... I use vag tan shoulder. Works great... I like your collar and nice stitching! Thanks! Do you line your collars with anything? 2 hours ago, Mark842 said: Looks awesome! Looking in at the inside at the stitching I would say maybe take a cobblers hammer to it and flatten down the stitching some. Thanks Mark - I did tap the bottom stitches down some - I will have to hit them again! Quote
Members Rolandranch Posted August 3, 2017 Members Report Posted August 3, 2017 Looks great to me! The only thing I would have done differently would be to round off the edges with a beveler. I really like the color contrast with the stitching. I wouldn't change that at all. One thing's for sure, if I had made that I wouldn't let my dog wear it and scratch it all up! Good work! Quote
garypl Posted August 3, 2017 Author Report Posted August 3, 2017 13 minutes ago, Rolandranch said: Looks great to me! The only thing I would have done differently would be to round off the edges with a beveler. I really like the color contrast with the stitching. I wouldn't change that at all. One thing's for sure, if I had made that I wouldn't let my dog wear it and scratch it all up! Good work! Thanks Roland - I thought about edging it, but I was concerned that the thin leather liner would not look smooth if I tried to bevel it. I'll look at the collar after a few months and see how it is wearing - I need to invest in some nice quality leather - a lot of what I have seems soft and stretchy. Quote
Members ByNelson Posted August 4, 2017 Members Report Posted August 4, 2017 Sometimes I do polyethyle foam as padding.... but I also really like them all natural like in the attached photo. Quote
garypl Posted August 4, 2017 Author Report Posted August 4, 2017 4 hours ago, ByNelson said: Sometimes I do polyethyle foam as padding.... but I also really like them all natural like in the attached photo. Nicely made - I think I need to add a keeper to keep the tip of the collar flat. Quote
Members ByNelson Posted August 4, 2017 Members Report Posted August 4, 2017 11 hours ago, garypl said: Nicely made - I think I need to add a keeper to keep the tip of the collar flat. Yeah the keeper is a really nice addition to the final product Quote
Members CaptQuirk Posted August 5, 2017 Members Report Posted August 5, 2017 Just be sure you use a welded D ring. I had to whip up a collar at 4 AM one morning, and did not have a single welded D ring on hand. What I ended up using worked for several weeks, and finally failed today. Quote
garypl Posted August 5, 2017 Author Report Posted August 5, 2017 I agree - the only type I use are welded! Quote
Members nrk Posted August 9, 2017 Members Report Posted August 9, 2017 chicago screws are not the best way to strengthen the item witch can potentially experience force pressure. tubular rivets will do better reinforcement, or simply sewing. Quote
garypl Posted August 10, 2017 Author Report Posted August 10, 2017 43 minutes ago, nrk said: chicago screws are not the best way to strengthen the item witch can potentially experience force pressure. tubular rivets will do better reinforcement, or simply sewing. Good point - I also stitched the buckle end as extra insurance! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.