Battery bag

[the gafer]

I have been tasked to make a battery bag it's used for hunting I have never done any bags of any kind just dog collars and so on so I am a bit stuck at the moment hears what I have so far but was thinking of changing it all up and putting in a gusset I no there are more experienced guys than me on hear and would like a little help if you can post a few pics and ideas up I would be very grateful thank kev

 

 

 

[Stetson912]

I think gusset is the way to go to finish that pouch. The other option is wet molding the front around the battery. You'd need to make a mold/form of the battery though. A gusset isn't anything more than a strip of leather haha. 

[mikesc]

Wet molding around something that needs bag to protect it from the elements might not be such a good idea..shorting what might be a lithium pack can be spectacular, and very hard to extinguish. "samsung galaxy note 7 syndrome"

[twc]

When I've "wet-molded" leather around sensitive materials (like cell phones and guns), I've put them in ziplock bags first. Haven't had a problem, but I'm not making any guarantees, either.

[the gafer]

I think wet mould is out as I only use bridle leather for my work so looks like the gusset is the way forward 

Edited October 12, 2017 by the gafer

[Jack142]

I don't know if this will help you, but I did a cell phone pouch to sit on the front of my belt. I used chicago screws. way easier than stitching.  9 oz or thicker leather. lots of grooving/skiving  on the flesh side... 

[the gafer]

Gusset way it is guys any tips on how to do it right

[Stetson912]

I did say to make a form if wet molding for the purpose of not getting the battery wet, but bridle doesn't wet form very well.

All you do with a gusset is measure how long it needs to be. Cut a strip of leather a little longer than that (to protect against it being too short) and to the width you want, and clip or glue it down to the sides making sure the edges are flush. then stitch. Trim off the excess at the top and there you go lol. 

[dGinLeatherCraft]

How about a two piece pouch? I made this for a tool bag - back piece folds up to form the base and there's no complicated gusset stitching in what looks like a small item, you could always re-enforce the back for belt attachments.

 

 

Just a suggestion :-)

 

Harv

Edited October 13, 2017 by dGinLeatherCraft

[fredk]

On 12/10/2017 at 9:17 PM, Stetson912 said:

...

All you do with a gusset is measure how long it needs to be. Cut a strip of leather a little longer than that (to protect against it being too short) and to the width you want, and clip or glue it down to the sides making sure the edges are flush. then stitch. Trim off the excess at the top and there you go lol. 

and skive the long edges and one end of the gusset piece and the corresponding length of the main piece. Make the bottom corners rounded, not too much, just a bit to ease the the front/bottom/back piece around without any tight corners

I like to make my gussets longer than needed, then skive and fold over the top end; give a neat finish