Jump to content

Recommended Posts

  • Members
Posted
12 hours ago, YinTx said:

I hadn't thought about "casting shadows" when doing acorns.... might make a big difference on my next set!  I have 4 swivel knives that came with a bunch of stuff I bought at the same time, 2 of them don't really swivel, one is a filigree knife so I haven't used it much, one is a really big knife, and two are cracked ceramic blades, so the big knife is the one that gets the use.  The swivel is ok, it's a Craftool Pro.

Your leaves have a lot of details in them, right down to the leaf liner.  I think I might have a pattern for a belt similar to this, I'll make a belt out of it and try to pay attention to those details, maybe my acorns will come out better.  I've done some leaf work, shown on a separate thread, they are a lot different from yours.  Acorns not so good on mine I think.

Your border bead is absolutely perfect all the way around to.  Admirable work!  Was that simply carved with the knife, or did you run a border tool around it?

YinTx

Thanks again Yin, If you buy one of those swivel knifes from Leather Wranglers, you will never use anything else again. They cut like butter and make carving a delight. I used an adjustable wing divider to draw the border lines and then used the swivel knife to cut the border lines followed by beveling. I will attach a pic of the swivel knife I used for doing the carving. And, I am not affiliated with them in any way, just love my swivel knife! :) 

  • Replies 28
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • Members
Posted

Yin,

Here is a pic of the swivel knife. It has a 3/16" wide blade and make all the difference in the world for doing detail carving. Makes me wonder how I ever got along without it lol. :lol:IMG_0056_2.thumb.jpg.7d87a9762e8e0eda8c78cf36fd81b7f3.jpg

  • Members
Posted

That is beautiful work man.

Posted
10 hours ago, JMcC said:

Thanks again Yin, If you buy one of those swivel knifes from Leather Wranglers, you will never use anything else again. They cut like butter and make carving a delight. I used an adjustable wing divider to draw the border lines and then used the swivel knife to cut the border lines followed by beveling. I will attach a pic of the swivel knife I used for doing the carving. And, I am not affiliated with them in any way, just love my swivel knife! :) 

I looked at the LW website and the swivel knives look good.  I am using a couple of Tandy knives and seems I am constantly stropping them.  I am struggling with deciding whether or not using a better quality knife will make enough of a difference to justify the cost.  Would be nice to test drive one before committing to the purchase!

Cowboy 4500, Consew 206RB-4

Posted

Well, the blade is what is doing the cutting, and needing the stropping. If you make sure to get the right diameter shank, a really fine blade will make the difference. I might try that myself. I think there are two major shank diameters. Just to have to make sure I pick the right one!

So much leather...so little time.

 

  • Members
Posted

Did you only use the background tool around the edge of the leaves and acorns? (It looks that way in the pictures) if so I like it? Heck if not I still like it! I've done many belts and when I see pictures like yours I feel like mine are never as nice. Awesome work. 

  • Members
Posted
4 hours ago, battlemunky said:

That is beautiful work man.

 

4 hours ago, garypl said:

I looked at the LW website and the swivel knives look good.  I am using a couple of Tandy knives and seems I am constantly stropping them.  I am struggling with deciding whether or not using a better quality knife will make enough of a difference to justify the cost.  Would be nice to test drive one before committing to the purchase!

 

4 hours ago, Jbrandon said:

Did you only use the background tool around the edge of the leaves and acorns? (It looks that way in the pictures) if so I like it? Heck if not I still like it! I've done many belts and when I see pictures like yours I feel like mine are never as nice. Awesome work. 

Thanks battlemunky :)  Garypl, The steel that Paul uses in his swivel knives is far superior to anything Tandy has or ever will have and I only wish I had discovered LW's swivel knives when I started doing leather carving. Jbrandon, you are correct, I only beveled around the leaves and acorns. I debated about using a background tool but decided it would take up a lot of time and since I was going to dye the background anyway, I decided against it ;)

 

  • Members
Posted
7 hours ago, garypl said:

 I am struggling with deciding whether or not using a better quality knife will make enough of a difference to justify the cost.  Would be nice to test drive one before committing to the purchase!

I test drove one for about an hour.  It was a smaller one, and yes, it was nice.  I had only been tooling for a month or so before that, so I realized I needed my tooling to actually make money for me before I could justify laying that kind of $$ down for yet another tool, especially when I already had 4 different ones - albeit all Tandy versions, I was able to cut leather and work.  I even did the wallet with tiny tiny tooling with my large 3/8" heavy thickness swivel knife.  On top of that, I think before I lay down a lot of money for a blade and knife combo, I need to understand which diameter shaft and length of shaft best fits my needs.  Seeing that folks have sharpened a screwdriver and gone to work, or use a utility knife instead of a round knife and get to work making things, makes it even harder to spend more $$ on one.  Yeah, I want one.  Might be a few years before I convince myself to get one.  Having a hard enough time convincing myself to buy a 1/4" thin blade for $20 when I have already cut flowers the size of a quarter with the big blade I already have.  I think we all to often get bitten by the "I need this better tool" bug, when we could make a perfectly useable petal lifter with a free screwdriver.  (Which works better than my $40 petal lifter that I had to fix brand new anyhow).

Also, it's tax time, and I see how much I have already spent in the last year on this craft!

YinTx

  • Members
Posted
17 hours ago, JMcC said:

If you buy one of those swivel knifes from Leather Wranglers, you will never use anything else again

Your knife is a beautiful work of art as well, by the way.  Kind of the custom leather belt vs. Wally world belt comparison I suppose.. once you try the super nice leather belt I make, you won't want another cheapo Wally world one!

YinTx

Posted
2 hours ago, YinTx said:

I test drove one for about an hour.  It was a smaller one, and yes, it was nice.  I had only been tooling for a month or so before that, so I realized I needed my tooling to actually make money for me before I could justify laying that kind of $$ down for yet another tool, especially when I already had 4 different ones - albeit all Tandy versions, I was able to cut leather and work.  I even did the wallet with tiny tiny tooling with my large 3/8" heavy thickness swivel knife.  On top of that, I think before I lay down a lot of money for a blade and knife combo, I need to understand which diameter shaft and length of shaft best fits my needs.  Seeing that folks have sharpened a screwdriver and gone to work, or use a utility knife instead of a round knife and get to work making things, makes it even harder to spend more $$ on one.  Yeah, I want one.  Might be a few years before I convince myself to get one.  Having a hard enough time convincing myself to buy a 1/4" thin blade for $20 when I have already cut flowers the size of a quarter with the big blade I already have.  I think we all to often get bitten by the "I need this better tool" bug, when we could make a perfectly useable petal lifter with a free screwdriver.  (Which works better than my $40 petal lifter that I had to fix brand new anyhow).

Also, it's tax time, and I see how much I have already spent in the last year on this craft!

YinTx

You make some good points Yin.  I don’t do this to make money, it’s just an expensive hobby!  I’m also a tool junkie, so I will probably get one to see what I am missing.

Cowboy 4500, Consew 206RB-4

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...