Members Windrider30 Posted January 7, 2018 Members Report Posted January 7, 2018 Just a quick question whats the best way to wrap a mason jar with a bit of leather so the leather actually stays in place? Have a stupid yet maybe profitable store idea Quote
Members Grumpymann Posted January 7, 2018 Members Report Posted January 7, 2018 Wouldn't it be a bear to clean out the glass? Quote
Members leathersmyth Posted January 7, 2018 Members Report Posted January 7, 2018 There could be many ways to do it. Elastic and leather, Snaps and leather, Lace etc...... Just depends on your look you are going for... Quote
Members Windrider30 Posted January 7, 2018 Author Members Report Posted January 7, 2018 7 hours ago, Grumpymann said: Wouldn't it be a bear to clean out the glass? I am wraping the leather on the outside of said jar or wanting to at any rate, and hmm making a removable jacket of sorts might be an interesting idea!! Quote
bikermutt07 Posted January 7, 2018 Report Posted January 7, 2018 Is this a drinking Mason jar or a storage mason jar? Quote
Members Windrider30 Posted January 7, 2018 Author Members Report Posted January 7, 2018 Just now, bikermutt07 said: Is this a drinking Mason jar or a storage mason jar? Storage...something along this line https://www.ballmason.com.au/cases-of-jars/wide-mouth-jars/4-x-ball-collection-elite-blue-jars-wide-mouth-pint once I figure out how to wrap the jars I will share what my crazy and stupid idea business wise is lol Quote
Mjolnir Posted January 7, 2018 Report Posted January 7, 2018 22 hours ago, Windrider30 said: Just a quick question whats the best way to wrap a mason jar with a bit of leather so the leather actually stays in place? Have a stupid yet maybe profitable store idea Honestly I was going to say glue until I realized that you are fishing for a solution to a problem you won't share so you can profit from it. Quote
Members kiwican Posted January 7, 2018 Members Report Posted January 7, 2018 (edited) I made mine almost 4 years ago and i use it everyday for both hot and cold drinks, I measured the circumference of the mason jar and overlapped by about a half inch. I used 3 plan old rivets to hold it together and attached the handle the same way. I have had no issues at all with the jar slipping out. This pic was taken just after I made it. It has darkened in the most amazing way. Love my mug holder Edited January 7, 2018 by kiwican added a pic Quote
bikermutt07 Posted January 7, 2018 Report Posted January 7, 2018 14 minutes ago, Windrider30 said: Storage...something along this line https://www.ballmason.com.au/cases-of-jars/wide-mouth-jars/4-x-ball-collection-elite-blue-jars-wide-mouth-pint once I figure out how to wrap the jars I will share what my crazy and stupid idea business wise is lol Ok, so for consumption then. I would make a ¼ or ½ lid with snaps across part of the top of the sleeve. And then of course a bottom and possibly a handle. Quote
mikesc Posted January 7, 2018 Report Posted January 7, 2018 (edited) Depends entirely on what you mean by Quote so the leather actually stays in place vertically or rotationally.. or both..multiple solutions, all of them easy, each solution takes less than 30 seconds to do ..if you make the leather "wrap" ( making the "leather wrap" is not included in the 30 seconds solutions )carefully. Edited January 7, 2018 by mikesc Quote
Members Windrider30 Posted January 7, 2018 Author Members Report Posted January 7, 2018 Just now, mikesc said: Depends entirely on what you mean by vertically or rotationally.. or both..multiple solutions, all of them easy, each takes less than 30 seconds to do ..if you make the leather "wrap" carefully. Horizontal thinking of a handle as well handle is the easy part Quote
mikesc Posted January 7, 2018 Report Posted January 7, 2018 (edited) Ok..so that depends on what you mean by "handle"..what form do you want it ( the handle ) to take..and do you want it to be made from leather, and ( if you do ? ) do you want it to be made from the same piece as the wrap..and with or without sewing..and what thickness of leather to use for each part of the "assembly". Quote Horizontal thinking of a handle as well handle is the easy part Btw..a comma or two in that sentence, would aid one in making sense of it. Edited January 7, 2018 by mikesc Quote
Mjolnir Posted January 7, 2018 Report Posted January 7, 2018 27 minutes ago, kiwican said: I made mine almost 4 years ago and i use it everyday for both hot and cold drinks, I measured the circumference of the mason jar and overlapped by about a half inch. I used 3 plan old rivets to hold it together and attached the handle the same way. I have had no issues at all with the jar slipping out. This pic was taken just after I made it. It has darkened in the most amazing way. Love my mug holder that is soo cool Kiwi! I think i'll do that to my Yeti just because. Quote
mikesc Posted January 8, 2018 Report Posted January 8, 2018 I'm thinking , if you could get some "product placement" on NCIS.. Maybe send a personalized "tooled "version to Mark Harmon. Quote
Mjolnir Posted January 8, 2018 Report Posted January 8, 2018 6 minutes ago, mikesc said: I'm thinking , if you could get some "product placement" on NCIS.. Maybe send a personalized "tooled "version to Mark Harmon. I did buy a Zero Tolerance knife because of an NCIS episode! you can shave with it. Quote
bikermutt07 Posted January 8, 2018 Report Posted January 8, 2018 1 hour ago, kiwican said: I made mine almost 4 years ago and i use it everyday for both hot and cold drinks, I measured the circumference of the mason jar and overlapped by about a half inch. I used 3 plan old rivets to hold it together and attached the handle the same way. I have had no issues at all with the jar slipping out. This pic was taken just after I made it. It has darkened in the most amazing way. Love my mug holder Can we see a recent picture? Quote
mikesc Posted January 8, 2018 Report Posted January 8, 2018 Quote I did buy a Zero Tolerance knife because of an NCIS episode! you can shave with it. You could use the mason jar ( in leather holder ) as a shaving soap mug ( if that is what you call it, the mug that you work up the soap foam in )...you could make a leather holder for the brush and the knife..I can see it now..leather shaving set..with Cusson's Imperial Leather soap ( when I was a kid that was a brand, maybe still is..I wouldn't know, I have a beard )..but the idea of a shaving set is good..in a leather shaving bag.. I can see it now..we're gonna be rich..I can see the yacht..right next to Larry's. Quote
Members kiwican Posted January 8, 2018 Members Report Posted January 8, 2018 (edited) Id like to post some new pics but i cant seem to be able to compress the image to meet the file size requirement! Edited January 8, 2018 by kiwican added pic Quote
bikermutt07 Posted January 8, 2018 Report Posted January 8, 2018 1 hour ago, kiwican said: Id like to post some new pics but i cant seem to be able to compress the image to meet the file size requirement! That is awesome. 2 hours ago, mikesc said: You could use the mason jar ( in leather holder ) as a shaving soap mug ( if that is what you call it, the mug that you work up the soap foam in )...you could make a leather holder for the brush and the knife..I can see it now..leather shaving set..with Cusson's Imperial Leather soap ( when I was a kid that was a brand, maybe still is..I wouldn't know, I have a beard )..but the idea of a shaving set is good..in a leather shaving bag.. I can see it now..we're gonna be rich..I can see the yacht..right next to Larry's. With a quart jar you could make the whole travel kit. Toothbrush and all. Quote
Members Windrider30 Posted January 8, 2018 Author Members Report Posted January 8, 2018 Great responses everyone a huge help. I had originally thought to use glue but I thought that A: that would look bad B: figured it would be hard to get glue to stick to the glass. Kiwican thanks perfect for what i want. Now as for the businesses idea pretty simple and an excuse to use my leather scraps is a simple businessof selling Australia air...yep thats right moonshine air with a bit of leather craft selling it more as a novelty item Quote
Members Windrider30 Posted January 8, 2018 Author Members Report Posted January 8, 2018 3 hours ago, kiwican said: Id like to post some new pics but i cant seem to be able to compress the image to meet the file size requirement! That is really cool does it slide off easy or not? Quote
Members tomsmith85717 Posted January 8, 2018 Members Report Posted January 8, 2018 Hose clamps! Honestly go try some things and then come back here and you tell us. You are not wasting time or leather as long as you learn something. Quote
Members Windrider30 Posted January 8, 2018 Author Members Report Posted January 8, 2018 3 hours ago, tomsmith85717 said: Hose clamps! Honestly go try some things and then come back here and you tell us. You are not wasting time or leather as long as you learn something. I prefer to ask questions of people that have done something that I have not before I jump into ANY projects why reinvent the wheel? Quote
Members kiwican Posted January 8, 2018 Members Report Posted January 8, 2018 9 hours ago, Windrider30 said: That is really cool does it slide off easy or not? No. The jar stays in tight. I have to pull it from the sleeve when I want to clean it. When I first made it. I had to work the jar in. Over time it stretched out a little. But at no time have I ever been concerned that the jar would slip out. I used sno seal on the inside of the sleeve to protect against moisture getting into the leather which is something you may want to consider also Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.