Members micktx Posted January 15, 2018 Members Report Posted January 15, 2018 Hey Folks, Wondering if there is a mechanism to turn my 29-4 into a hand crank? Quote
Moderator Wizcrafts Posted January 15, 2018 Moderator Report Posted January 15, 2018 3 hours ago, micktx said: Hey Folks, Wondering if there is a mechanism to turn my 29-4 into a hand crank? Look for a bolt-on Brodie knob for the flywheel. The knob should be adjusted so it has enough clearance to turn freely, letting you hand spin the flywheel. Many 29 models already have this handle installed. Auto parts stores and Walmart usually sell them, as do many sewing machine dealers. Quote
Members Yetibelle Posted January 15, 2018 Members Report Posted January 15, 2018 I think Wiz is referring to the Knob you can add to the hand wheel. There is a spot on the hand wheel you can drill and then add the knob so it makes it a crank. Also - you can get a few parts and move the hand wheel to the side of the machine. Those parts can be hard to come by if they didn't come with your machine. Quote
Members Cascabel Posted January 15, 2018 Members Report Posted January 15, 2018 I just stick my finger between the spokes on the wheel on my 29-4, and spin it that way. Mine turns quite easily, because it's well oiled. Never saw the need for a hand crank on it. Mine has a treadle, but I never use it. Quote
Members Darren Brosowski Posted January 15, 2018 Members Report Posted January 15, 2018 (edited) I have brand new Chinese wheels with the timber handle Not sure what else you need but I may have the hub and shaft as well. Edited January 15, 2018 by Darren Brosowski ADD Picture Quote
CowboyBob Posted January 15, 2018 Report Posted January 15, 2018 They have a 29-4 so 29K the hub & shaft won't fit,since it only has 2-holes & the 29K hub has 3. Quote
Members micktx Posted January 16, 2018 Author Members Report Posted January 16, 2018 Wow! Thanx for all of the response. Really do appreciate it. I'll be looking for the pieces-parts to convert. Quote
Members Constabulary Posted January 16, 2018 Members Report Posted January 16, 2018 Do you just need just a knob for the hand wheel or a complete conversion to a front crank as Yetibele it has shown? The complete conversion kit (if it will fit at all) for sure will cost a lot of money - not sure if it is really worth converting a 100 years old machine that way. However - you only can convert to front crank if a gear is mounted on the top shaft in front of the drive cam. Open the rear cover and check. If there is no gear you have to pull the top shaft and install a gear. Pulling the top shaft means disassembling almost the complete machine. And thats really not worth it - in my opinion. Quote
Members micktx Posted January 16, 2018 Author Members Report Posted January 16, 2018 Thanx Constabulary. I'm finding out that the complete conversion is going to be a few ducats. Will probably go with the Knob. Quote
Members shoepatcher Posted January 20, 2018 Members Report Posted January 20, 2018 I believe the 29-4 does not have the front tooth cam gear that is bolted to the top shaft. It has the back half of the gear that the pitman arm fits in but not the forward section that the short shaft gear mates to drive the front mounted shaft that comes thru the hub. Some of the early 29K's had the front mounted shaft on certain models but not the 29-4. Changing means pulling the top shaft plus the bub will not mount to the casting because of a different face plate. glenn Quote
Members micktx Posted January 21, 2018 Author Members Report Posted January 21, 2018 Thanx Shoepatcher, Found that out the hard way. LOL At least that part machine is clean now. Hard to learn the hard. Quote
Members jaygeo2020 Posted February 19, 2021 Members Report Posted February 19, 2021 On 1/15/2018 at 8:44 AM, Yetibelle said: I think Wiz is referring to the Knob you can add to the hand wheel. There is a spot on the hand wheel you can drill and then add the knob so it makes it a crank. Also - you can get a few parts and move the hand wheel to the side of the machine. Those parts can be hard to come by if they didn't come with your machine. where can I get a set like this? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.