Is there a font for Ivan Alphabet stamp set 8132-00

[RockyAussie]

8 hours ago, JLSleather said:

OH, so its a commercial venture thing.  Now I'm with ya. Up until that, I was wondering why not simply laser the letters on the leather and paint em

 

 

2 hours ago, immiketoo said:

Cause it looks bad?

Mike is dead right on that I reckon but although the end result is not really to my taste .....The pics  show a pretty professional finish I think.

Tape peels out nice

A bit of a roll to make sure no edgesare sticking up

Yeah it looks like shi...t

oh so blue

Painting is done

A bit of pressure

And its looks a lot better.....?

The $300 2.5 watt Eleksmaker laser getting another $200+ resize with bigger rails. This will allow me to do a full belt in one go and is wide enough to do a large poster size which means I can now cut out my product boxing from full size sheets and I can get several boxes cutting at the same time. More to come on that later.

 

[RockyAussie]

9 hours ago, noobleather said:

Great font ,like the painted letters.Just a regular acrylic paint or something more exotic?

So you printed the guide ? They for sale?

 

Thanks @noobleather I used some overpriced spray paint for shoes at first but the clear finish wrinkled it up so I then resorted to using my old edging colours. They are a little exotic I guess because I sort of make them myself from a mixture of clear Ares AR 6350 ( you can get it from Texon in Melbourne) and many in the other countries will have it branded Fenice AR 6350. I use 90% clear AR6350 to 10% liquid pigments that I have previously bought from Clarient. You may have to replace that with the Stahl waterbase pigments that can be bought in smaller quantities. As to the guide ...its a bitch to adjust when you are adjusting the back and the top at the same time and you are looking for less than a 1/2mm line up. I decided to super glue the back to be a permanent 38mm(1 1/2") and that leaves me free to adjust the top only. If your not concerned about double line ups its good. Price I think would be $30.00 plus post ($11.00 express in Australia). If you want the stl file to print it let me know in a PM or I can print it for you.

Regards Brain